Skip to main content
Omron E5EC-TQX4D5M-019

Omron E5EC-TQX4D5M-019 Process Controller, 24VAC/DC

MPN E5EC-TQX4D5M-019
Active

Omron E5EC-T series, Process / Temperature Controller, 24VAC/DC supply, 4 Relay + Voltage (External SSR) outputs, LCD Tri-Color display, IP66 front panel, Panel Mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5EC-TQX4D5M-019 specifications
ParameterValue
SeriesE5EC-T
Output signalRelay (4), Voltage (External SSR)
Supply voltage24 VAC/DC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.463 lb (210.01 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

Universal input, 24 V supply, four-relay output

The Omron E5EC-TQX4D5M-019 is a 1/4 DIN process and temperature controller accepting RTD, thermocouple (Types B, E, J, K, L, N, PLII, R, S, T, U, W), and analog signals (0–20 mA, 0–10 VDC) over a span from -200°C to 2300°C. It runs on a 24 VAC/DC supply, which is common in control panels where a 24 VDC bus is already present for PLCs and sensors — no need to pull a separate 100–240 VAC feed. The output stage gives you four relay contacts plus a voltage pulse for driving an external SSR. That combination covers both on/off and PID control of resistive heaters, solenoid valves, or contactor coils, while the SSR drive handles fast-cycle loads like a solid-state relay on an electric heater bank.

Heater fault detection and event input onboard

Built-in heater fault detection monitors the load current via an external CT and flags a broken heater or SSR short before the process drifts. The event input lets a PLC or limit switch remotely switch the controller between two setpoints or start/stop control — useful for recipe changeovers or interlocking with a safety circuit. The tri-color LCD backlight shows the PV, SV, and status characters in three rows (18 mm, 11 mm, and 7.8 mm high). The IP66-rated front panel withstands washdown in food or chemical processing environments — the gasket seals the bezel, not just the display window.

Panel cutout and mounting

The rectangular cutout is 92.00 mm × 45.00 mm — the standard 1/4 DIN footprint. Screw-terminal connections on the rear accept up to 14 AWG; no special crimp tooling needed.

MPN
E5EC-TQX4D5M-019