Skip to main content
Siemens 3RF2430-1AB45

Siemens 3RF2430-1AB45 SIRIUS Solid-State Contactor, 30 A AC-

MPN 3RF2430-1AB45
Active

Siemens SIRIUS solid-state contactor, 3RF2430-1AB45, two-phase controlled, 30 A AC-51, 48-600 V AC, zero-point switching, screw terminals, DIN rail mount.

$277.81 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RF2430-1AB45 specifications
ParameterValue
Depth119.5 mm
Width74.5 mm
Height100 mm

Product details

The Siemens 3RF2430-1AB45 is a SIRIUS solid-state contactor designed for zero-point switching of resistive and lightly inductive loads in AC circuits. It is a two-phase controlled device, meaning it switches two of the three phases in a three-phase system, which is standard for many heater and lighting applications where the third phase can be left connected or switched separately. Rated at 30 A in AC-51 duty (resistive load category per IEC 60947-4-3), it handles a supply voltage range of 48 to 600 V AC at 50/60 Hz. The UL 508 rating is 22 A, which is the value to use for North American panel designs. The minimum operational current is 500 mA, so it is not suited for very low-current signal switching below that threshold. The I²t value is 7200 A²s, which defines the short-time withstand capability for fuse coordination.

Dimensions are 74.5 mm wide, 100 mm high, and 119.5 mm deep, which is a compact footprint for a 30 A solid-state contactor. Side-by-side mounting is permitted, which helps density in a control panel. Main circuit terminals accept 1.5 to 6 mm² solid or stranded wire (AWG 14-10 for two conductors). Control circuit terminals accept 0.5 to 2.5 mm² solid (1x) or 0.5 to 1.0 mm² (2x). All terminals are screw-type, so a screwdriver is needed for termination.

Electrical characteristics and thermal management

Power dissipation is 61 W in the hot operating state (at rated AC current), and standby power is 0.9 W without load. Control current at DC rated value is 30 mA (22 mA at DC). The ON-delay time is 1 ms plus a maximum of one half-wave, which is typical for zero-point switching — the load turns on at the next zero crossing after the control signal is applied.

MPN
3RF2430-1AB45