Skip to main content
Siemens 3RW3017-1BB04

Siemens 3RW3017-1BB04 SIRIUS Soft Starter, 12.5 A, Size S00

MPN 3RW3017-1BB04
Active

Siemens SIRIUS soft starter, 3RW3017-1BB04, size S00, 12.5 A at 40 °C, 24 V control voltage, integrated bypass contactor, screw and snap-on mounting.

$244.98 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW3017-1BB04 specifications
ParameterValue
Mountingscrew and snap-on mounting
Depth150 mm
Width45 mm
Height95 mm

Product details

The Siemens 3RW3017-1BB04 is a SIRIUS soft starter in size S00, rated 12.5 A at 40 °C, derating to 12 A at 50 °C and 11 A at 60 °C. That 12.5 A figure is the continuous motor current it can ramp up without the thermal stress of a direct-on-line start — sized for a motor drawing roughly 5.5 to 7.5 kW at 400 V three-phase, depending on the load duty cycle. An integrated bypass contactor is built in, meaning once the motor reaches full speed the thyristors are shorted out. That eliminates SCR heat dissipation during run, so the enclosure doesn't need extra ventilation for continuous duty. The downside: no external reset input, so a fault trip requires a manual power cycle or a remote contactor ahead of it. Mounting is screw or snap-on onto a DIN rail, with 45 mm width and 95 mm height. Clearance requirements: 60 mm above, 40 mm below, 15 mm to the side. That's tighter than many soft starters in this class — useful for a crowded panel where every millimeter counts.

This is a motor-starting component for a control panel, not a standalone drive. It ramps voltage to an induction motor over a set period, limiting inrush current. The operating temperature range of -25 to +60 °C covers most plant-floor conditions, but derating starts at 40 °C, so a hot cabinet near a furnace or oven needs the 50 °C or 60 °C current column. Main circuit connections are screw-type terminals; auxiliary and control circuits also use screw terminals. Solid wire range is 2x 0.25 to 2.5 mm². No inside-delta circuit configuration, so it's a standard in-line soft starter, not a six-wire delta-connected unit.

MPN
3RW3017-1BB04