Skip to main content
Siemens 3RW4422-1BC34

Siemens 3RW4422-1BC34 SIRIUS Soft Starter, 50 A, 690 V

MPN 3RW4422-1BC34

Siemens SIRIUS 3RW4422-1BC34 soft starter, 50 A at 40 °C, 690 V insulation voltage, 50/60 Hz, integrated bypass, thyristor control, IP20, screw fixing.

$2,263.14 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW4422-1BC34 specifications
ParameterValue
Mountingscrew fixing
Depth270 mm
Width170 mm
Height192 mm

Product details

SIRIUS 3RW44 soft starter — motor starting in the panel

The Siemens 3RW4422-1BC34 is a SIRIUS 3RW44 series soft starter, designed to ramp three-phase induction motors up to speed and protect them during start. It uses thyristors to control voltage to the motor, reducing inrush current and mechanical stress on the driven load — conveyors, pumps, fans, compressors in a control panel.

Integrated bypass and adjustable current limit

An integrated bypass contact system shorts the thyristors once the motor is at full speed, eliminating the semiconductor heat load during run — the bypass carries the 50 A continuously without the 1–1.5 V forward drop of the SCRs. This keeps the enclosure temperature rise in check and lets the soft starter handle longer start cycles. Adjustable current limitation sets the maximum current the soft starter delivers during start, typically 2–5× the motor FLA depending on the load. The minimum load is 8% of the rated current — below that the motor current may be too low for the thyristor firing circuit to detect, causing a trip. Motor overload protection is built in, so no separate overload relay is needed for most installations. The intrinsic device protection covers the thyristors against overtemperature and phase loss.

Mounting, wiring, and clearance

Screw fixing to the back panel — the unit is 192 mm high, 170 mm wide, 270 mm deep. The mounting position allows vertical mounting surface with ±90° rotation and ±22.5° tilt front/back, so it fits in angled or space-constrained enclosures. Clearance around the device: 100 mm above, 75 mm below, 5 mm at the sides. Maximum motor cable length is 500 m — longer runs increase charging current that can nuisance-trip the soft starter. Pollution degree 3 per IEC 60947-4-2 means it tolerates conductive dust and humidity typical in industrial environments.

MPN
3RW4422-1BC34