Skip to main content
Siemens 3RW5524-3HF14

Siemens 3RW5524-3HF14 Soft Starter, 200-480 V, ATEX

MPN 3RW5524-3HF14
Active

Siemens 3RW5524-3HF14 soft starter, 200-480 V rated voltage, ATEX and IECEx certified, CLASS 10A/10E trip class, PROFIBUS, Modbus RTU/TCP, EtherNet/IP, UL/CSA approved, 203 x 185 x 306 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5524-3HF14 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width185 mm
Height306 mm
Trip classCLASS 10 A / 10E (default) / 20E / 30E; acc. to IEC 60947-4-2
Service factor1.15
Digital output version2 normally-open contacts (NO) / 1 normally-closed contact (NC) / 1 changeover contact (CO)

Product details

ATEX-certified soft starter for hazardous-area motor control

The Siemens 3RW5524-3HF14 is a soft starter carrying ATEX and IECEx certification, meaning it can be deployed in Zone 1/21 or Zone 2/22 hazardous areas where explosive atmospheres may be present — a requirement often missed on standard soft starters that forces a separate enclosure. Rated voltage spans 200 to 480 V, covering the common low-voltage motor range across 50/60 Hz systems, with control supply accepted from 110 to 250 V at either frequency. Trip class defaults to CLASS 10A or 10E per IEC 60947-4-2, with selectable 20E and 30E options — CLASS 10A limits the thermal stress during start to 10 seconds at locked-rotor current, protecting standard squirrel-cage motors without oversizing the starter.

Multi-protocol fieldbus and analog feedback for integrated control

The 3RW5524-3HF14 supports PROFIBUS, Modbus RTU, Modbus TCP, and EtherNet/IP natively — no separate communication module needed for these protocols, which simplifies BOM and reduces panel wiring for plants running mixed-automation architectures. An analog output configurable as 4-20 mA or 0-10 V provides motor current or torque feedback to a PLC or SCADA, enabling real-time load monitoring without an external transducer. PROFIenergy support is available when paired with PROFINET communication modules, allowing coordinated energy-saving pauses during production breaks — a feature for automotive and batch-process lines.

Advanced motor control: torque, ramp, and braking features

Voltage ramp start, torque control, and a breakaway pulse let the starter handle high-inertia loads (conveyors, crushers, pumps) by delivering a controlled torque profile that avoids mechanical shock to the drivetrain. DC braking provides a controlled stop for loads that coast excessively — useful on centrifuges or fans where freewheeling extends cycle time. Pump ramp down reduces the risk of water hammer in pumping systems by gradually decreasing the motor voltage during stop, rather than cutting power abruptly.

Panel integration and compliance documentation

Dimensions of 203 mm depth, 185 mm width, and 306 mm height fit standard 600 mm deep enclosures; clearance requirements of 100 mm upwards, 75 mm downwards, 5 mm sideways, and 10 mm forwards allow airflow and cable bending radius. Accuracy Class 5 per IEC 61557-12 means the integrated current measurement is within 5 % of reading, sufficient for motor protection and energy monitoring without a separate CT.

MPN
3RW5524-3HF14