Skip to main content
Siemens 4EP4001-2US00

Siemens 4EP4001-2US00 Mains Choke, 41A, 0.81mH, IP00

MPN 4EP4001-2US00

Siemens SENTRON 4EP4001-2US00 mains choke (Netzdrossel f. FU), 3-phase, 500V AC, 41A rated current (45A max), 0.81mH, IP00, screw terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP4001-2US00 specifications
ParameterValue
IP ratingIP00
Depth0.143 m
Width0.219 m
Height0.179 m

Product details

FU). It smooths current harmonics, limits inrush current, and protects the drive rectifier from line transients. Rated for 500 V AC at 50 Hz with a rated current of 41 A (maximum 45 A) and an inductance of 0.81 mH, it produces a 4% relative inductive voltage drop at rated conditions — a typical value for drive input chokes that balances harmonic mitigation against voltage sag.

The 41 A rated current (45 A maximum) sets the continuous load capacity. For a 3-phase drive, this choke is typically sized for a drive with a rated input current at or below 41 A — check the drive's nameplate input amps, not the motor full-load amps. The 0.81 mH inductance and 4% voltage drop are a matched pair: higher inductance gives more harmonic attenuation but steals more voltage from the drive's DC bus. At 4%, this choke is in the standard range for general-purpose drive protection. The 77.4 W copper loss plus 25 W iron-core loss (total ~102 W at rated load) means it sheds heat; mount it with clearance for airflow — IP00 means no enclosure, so it goes inside a panel or cabinet, not in a washdown zone.

Physical integration

Dimensions are 0.219 m wide by 0.179 m tall by 0.143 m deep. The IP00 rating means it's open-frame — no drip shield, no finger-safe enclosure. Mount it inside a cabinet with at least 50 mm clearance on all sides for convection cooling. The thermal class B insulation (130 °C rise) per IEC 60085 gives headroom for the 40 °C ambient rating.

MPN
4EP4001-2US00