Skip to main content
Siemens 5SJ4113-8HG40

Siemens 5SJ4113-8HG40 SENTRON MCB, 1P 13A D-curve, 10kA

MPN 5SJ4113-8HG40
Active

Siemens SENTRON 5SJ4 series, miniature circuit breaker, 1-pole, 13 A, D characteristic, 10 kA breaking capacity per EN 60898, 15 kA per IEC 60947-2, 400 V AC, 18 mm wide.

$77.65 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SJ4113-8HG40 specifications
ParameterValue
Poles1
Mountingon standard mounting rail
Temp operating max55 °C
Temp operating min-25 °C
Depth70 mm
Width18 mm
Height90 mm

Product details

That D curve means it's built for loads with high inrush: motor starters, small transformers, discharge lighting. The magnetic trip holds through the startup surge and clears on a hard fault.

Snaps onto standard DIN rail — 18 mm width, one width unit. Mounting position any, so vertical or horizontal busbars work. Depth is 70 mm, same as installation depth; the combined tunnel terminals top and bottom take Cu conductors up to the rated torque of 3.5 Nm.

The D characteristic (10–20× In magnetic trip) is the key selection parameter: if your load is a resistive heater or a general-purpose outlet, you want B or C curve — D is for inductive kicks. For DC circuits, the maximum rated voltage is 60 V — relevant if this lands in a control panel with a 48 VDC bus.

MPN
5SJ4113-8HG40