Skip to main content
Siemens 5SL4525-7CC

Siemens 5SL4525-7CC SENTRON MCB, 1P+N, C-curve, 25 A, 10 kA

MPN 5SL4525-7CC
Active

Siemens SENTRON 5SL4525-7CC miniature circuit breaker, 1P+N, C-curve, 25 A, 10 kA breaking capacity at 230 V AC, 2-module width, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SL4525-7CC specifications
ParameterValue
Poles2
IP ratingIP20
Depth76 mm
Width36 mm
Height90 mm
Energy limitation class3

Product details

What it is and what it does

The Siemens 5SL4525-7CC is a SENTRON miniature circuit breaker — a 1P+N, C-curve device rated 25 A with a 10 kA breaking capacity at 230 V AC per EN 60898. That C-curve means it trips between 5 and 10 times rated current, so it handles moderate inrush from motor starters or lighting ballasts without nuisance trips, but clears a hard short fast enough to protect downstream cable. The 10 kA SCCR at 230 V AC tells you it can safely interrupt a fault up to that level without welding contacts or cascading upstream — critical for a residential or light commercial distribution board where the prospective fault current is known to stay under that threshold.

DIN-rail fit and panel integration

The 5SL4525-7CC occupies 2 modular width units (36 mm) on a standard DIN rail, with a depth of 76 mm and an installation depth of 70 mm. That 2-module footprint for a 1P+N breaker is typical — the neutral pole shares the same housing, so you don't need a separate neutral bar downstream. Mounting position is any, which simplifies layout in a crowded enclosure. The IP20 rating (with connected conductors) means it's protected against finger contact but not washdown; it belongs inside a sealed distribution panel, not on a wet factory floor.

Environmental and compliance notes

Halogen-free and silicon-free construction means the breaker won't produce corrosive off-gases in a fire — relevant for ventilated enclosures or populated control cabinets where relay contacts and busbars must stay reliable. The sealable design allows the installer to lock the toggle in the off position for lockout/tagout. Operating temperature range spans -40 °C to 75 °C, so it can sit in an unheated substation or a rooftop panel in direct sun without derating.

MPN
5SL4525-7CC