Skip to main content
Siemens 5SM6021-2

Siemens 5SM6021-2 SENTRON AFDD, 1-16 A 230 V, 1 MW

MPN 5SM6021-2
Active

Siemens SENTRON 5SM6021-2 arc-fault detection device unit block (AFDD), 1-16 A 230 V AC, 50 Hz, 1P+N, 2-pole, 1 MW, DIN rail mount, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SM6021-2 specifications
ParameterValue
Poles2
MountingDIN rail (REG)
Depth68.5 mm
Width54 mm
Height95 mm

Product details

The Siemens 5SM6021-2 is a SENTRON arc-fault detection device (AFDD) unit block designed to mount onto a compatible miniature circuit breaker (MCB) or residual current circuit breaker (RCBO) to add series arc-fault protection in a 1P+N, 2-pole configuration. Rated for 1-16 A at 230 V AC, 50 Hz, this AFDD occupies 1 modular width unit (18 mm) on a DIN rail, while the paired protective device (MCB or RCBO) requires 2 modular width units, for a combined 3-unit footprint. The unit block is designed for use with Siemens 5SY and 5SL4 MCBs, and 5SU1 RCBOs, making it a drop-in addition for new or existing SENTRON distribution boards where arc-fault protection is required by code or specification.

The 230 V AC, 50 Hz rating matches standard single-phase mains supply in European and many Asian markets. The 1P+N pole design means it switches the line conductor only; the neutral is switched by the paired RCBO or MCB. Mechanical service life of 10,000 operating cycles is typical for a protective device in this class — adequate for normal panel operation where the AFDD is not cycled frequently. The unit is designed for continuous duty, not as a switching device. IP20 protection with connected conductors means the AFDD is suitable for installation inside a distribution board or enclosure that provides additional environmental protection. It is not rated for wet or outdoor locations without a higher-rated enclosure. The -40 °C minimum is relevant for unheated utility rooms or seasonal cold storage.

Snap-on DIN rail (REG) mounting with any orientation. The 68.5 mm depth, 54 mm width, and 95 mm height match the standard SENTRON modular device footprint, so it aligns with adjacent breakers and accessories on the same rail. The supply connection is at the bottom of the unit, consistent with standard panel wiring practice for incoming feeders.

No official successor has been announced for this active part. For BOM planning, the 5SM6021-2 remains the current SENTRON AFDD unit block for 1P+N applications with 5SY/5SL4/5SU1 devices.

MPN
5SM6021-2