Skip to main content
Siemens 6ES7151-1AB05-0AB0

Siemens 6ES7151-1AB05-0AB0 IM 151-1 FO, 12 Mbit/s

MPN 6ES7151-1AB05-0AB0

Siemens SIMATIC DP Interface Module IM 151-1 FO for ET 200S, PROFIBUS DP, 12 Mbit/s, 244 byte I/O, 4 x Simplex FO.

$1,173.00 – $1,591.41 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7151-1AB05-0AB0 specifications
ParameterValue
Depth75 mm
Width45 mm
Height119.5 mm

Product details

IM 151-1 FO — why the FO matters

The Siemens 6ES7151-1AB05-0AB0 is the SIMATIC DP interface module for ET 200S that replaces the usual copper PROFIBUS connector with four simplex fiber-optic sockets. That means no ground loops, no noise pickup from VFD runs, and no common-mode voltage problems on long bus segments — if you've been chasing intermittent BF faults on a copper segment, the FO version is the fix. Rated transmission rate up to 12 Mbit/s with automatic baud detection across all standard PROFIBUS speeds. Data volume is 244 bytes each for inputs and outputs, enough for a full ET 200S station with up to 63 modules. Diagnostics are comprehensive: bus fault (BF) and group error (SF) LEDs plus a full diagnostics function and alarm capability. For an FO-based bus, the BF LED lights up if the FO link is down — check the simplex connectors first. Power draw: 200 mA from 1L+, 700 mA from backplane bus. Power loss 3.3 W typical; mains/voltage failure stored energy time 20 ms. Isolation between the bus and electronics is tested at 57 V DC / 60 V AC — this is a functional isolation, not safe galvanic separation, so treat the FO connectors as referenced to the same circuit ground.

MPN
6ES7151-1AB05-0AB0