Skip to main content
Siemens 6GT2800-4BB00

Siemens 6GT2800-4BB00 RF340T RFID Transponder, 13.56 MHz, 8

MPN 6GT2800-4BB00
Active

Siemens SIMATIC RF300 series, RF340T transponder, 6GT2800-4BB00, 13.56 MHz, 8 KB FRAM/EEPROM user memory, IP67/IPx9K, -25 to +85°C operating range, 48 × 25 × 15 mm, anthracite PA12 housing.

$182.04 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6GT2800-4BB00 specifications
ParameterValue
IP ratingIP67 / IPX9
Mounting2 x M3 screws
Shock acceleration500 m/s²
Coloranthracite
Depth48 mm
Width25 mm
Height15 mm
MaterialPA 12

Product details

RF340T — 13.56 MHz transponder for SIMATIC RF300

The Siemens 6GT2800-4BB00 is an RF340T read/write transponder in the SIMATIC RF300 family, operating at 13.56 MHz with a 106 kbit/s transfer rate. It carries 8189 bytes of user memory on FRAM/EEPROM with an additional 4-byte UID and 20 bytes of one-time-programmable (OTP) memory. Block-by-block write protection on the OTP region prevents accidental overwrite of critical identification data after commissioning. Rated IP67/IPx9K, the housing withstands high-pressure washdown and temporary submersion — typical for food-and-beverage or pharmaceutical lines where the tag follows a product carrier through cleaning cycles. The PA12 material and silicon-free construction suit cleanroom-adjacent zones where outgassing or silicone contamination is a concern. Temperature range splits by operating state: -25 to +85 °C during read/write access, -40 to +85 °C outside the read/write area and during storage. That means the tag can survive a hot wash cycle (storage limit) but must be within the narrower band when the reader actually pulls data — a detail that matters if the tag sits on a pallet passing through a hot tunnel.

Fastened with two M3 screws through the 48 × 25 × 15 mm anthracite housing. No DIN-rail clip; the form factor is a flat tag meant for direct attachment to a workpiece carrier, pallet, or product holder. The 105 mm read range is reader-dependent — Siemens application note 67384964 covers the pairing matrix. Protocol is RF300-specific, not ISO 15693 or generic HF — it talks only to SIMATIC RF300 readers (RF310R, RF320R, RF350R). No cross-vendor compatibility; the tag expects the Siemens handshake.

Minimum order quantity is 5 units per the description.

MPN
6GT2800-4BB00