Skip to main content
Siemens 6SL3000-0BE33-1AA0

Siemens 6SL3000-0BE33-1AA0 SINAMICS Line Filter, 400 A

MPN 6SL3000-0BE33-1AA0

Siemens SINAMICS line filter, 6SL3000-0BE33-1AA0, 380-480 V 3AC, 50/60 Hz, 400 A.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Product details

The Siemens 6SL3000-0BE33-1AA0 is a SINAMICS line filter rated for 400 A continuous at 380-480 V three-phase AC, 50/60 Hz. It sits on the input side of the drive to attenuate conducted emissions back onto the line, keeping the installation within EMC limits for the industrial environment. The 400 A rating means it pairs with a SINAMICS drive of similar input current — typically a G130 or G150 chassis unit in the 200 kW range, depending on motor load and duty cycle.

Integration Notes

Mounts in the standard SINAMICS chassis footprint — same bolt pattern as the G130/G150 input module. The 400 A bus bars use M10 studs; torque to the drive manufacturer's spec (typically 20 Nm). For EMC compliance, keep the filter within 500 mm of the drive's line input and use shielded cable on the motor side. The filter's leakage current to ground is inherent to the design; verify that the upstream RCD (if any) is type B or selective to avoid nuisance tripping.

MPN
6SL3000-0BE33-1AA0