50ms sampling for thermal loops that overshoot
The PXF9ACA2-JVMA1 samples every 50 ms — fast enough to catch temperature rise in injection molding barrels or reflow zones before the PID output overshoots the setpoint. Most general-purpose controllers sample at 100–250 ms; this one closes the loop tighter on fast-responding heaters. Self-tuning means the controller auto-calculates PID gains during the first heat-up cycle. On a new oven or extruder barrel zone, you can skip the manual Ziegler-Nichols step and let the controller converge to stable control within a few thermal time constants.
1/4 DIN panel cutout — retrofit or new build
The 96 x 96 mm face fits the standard 1/4 DIN cutout (92 x 92 mm panel opening per IEC 61554). If you're replacing an older Fuji PXF or a competitive 1/4 DIN controller, the cutout matches without panel rework. Compact depth behind the panel leaves room for wiring ducts and terminal blocks in a crowded enclosure. The controller body depth is typical for this class — no special clearance needed beyond the standard DIN rail or panel-mount bracket.
Current lifecycle — no end-of-life clock ticking
Sourced through independent distribution channels. No minimum order threshold beyond the standard distributor MOQ.