Self-tuning 1/4 DIN controller with 50 ms loop update
The PXF9APE2-0VMA1 is a Fuji Electric 1/4 DIN (96 x 96 mm) temperature and process controller that samples the input and updates the output every 50 ms — fast enough to catch thermal transients in a plastic extruder barrel or a reflow oven zone without the overshoot a slower loop would allow. The self-tuning algorithm auto-configures the PID constants on the first heat-up cycle, so a panel builder can commission a zone without manually entering gain, reset, or rate values.
Current lifecycle — no LTB or phase-out notice
Lifecycle stage is listed as current, meaning Fuji Electric has not issued a last-time-buy or discontinuation notice for this order code as of the latest record.
Panel fit — 1/4 DIN cutout, 50 ms loop
The 96 x 96 mm face and standard 1/4 DIN panel cutout (92 x 92 mm per IEC 61554) drop into any existing controller hole pattern without adapter plates. The 50 ms sampling speed means the controller resolves a thermocouple or RTD step change within two mains cycles — relevant for a temperature loop that needs to respond faster than a typical 250 ms PLC analog input scan.