Skip to main content
Mitsubishi Electric HG-KN43

Mitsubishi HG-KN43 MELSERVO-JE Servomotor, 400W, 1.3 Nm, IP6

MPN HG-KN43

Mitsubishi MELSERVO-JE HG-KN43 AC servomotor, 400 W, 1.3 Nm rated torque, 3.8 Nm peak, 3000 rpm, IP65, keyway shaft, no brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

HG-KN43 specifications
ParameterValue
SeriesMELSERVO-JE
Shaft typeKEYWAY
Encoder type17-BIT
Product typeHG-KN
IP ratingIP65
Depth128.3 mm
Width60 mm
Height60 mm
Weight1.4 kg

Product details

The Mitsubishi HG-KN43 is a 400 W AC servomotor from the MELSERVO-JE series, delivering 1.3 Nm rated torque and 3.8 Nm peak torque at 3000 rpm rated speed, with a maximum speed of 5000 rpm. The 17-bit absolute encoder (131072 p/rev) provides position feedback resolution suitable for general-purpose motion control on indexing tables, conveyors, and pick-and-place axes. IP65 protection means the motor body withstands washdown and particulate ingress — no additional enclosure needed for food-grade or wet-area mounting, though the connector and cable entry still require proper sealing per the installation manual. The keyway shaft (not a keyless clamp) requires a matching key and set-screw torque per the drawing. No brake is fitted — the load must hold position through the drive's holding brake or an external mechanical brake. For vertical-axis applications or power-off holding, specify the braked variant or add a separate brake resistor and holding circuit.

Powered from a 200 V AC three-phase supply. The MELSERVO-JE drive (sold separately) handles the commutation and encoder feedback; the motor cable set includes the power and encoder lines. Verify the drive firmware revision supports the 17-bit encoder protocol — older JE-series drives may require a firmware update.

MPN
HG-KN43