Skip to main content
Omron E5EC-TQX4D5M-010

Omron E5EC-TQX4D5M-010 Process/Temp Controller, 24V

MPN E5EC-TQX4D5M-010
Active

Omron E5EC-TQX4D5M-010, Process / Temperature Controller, 1/8 DIN, 24VAC/DC, 4 Relay + Voltage (External SSR) outputs, PID/On-Off control, IP66.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5EC-TQX4D5M-010 specifications
ParameterValue
SeriesE5EC-T
Output signalRelay (4), Voltage (External SSR)
Supply voltage24 VAC/DC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.463 lb (210.01 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

What the E5EC-TQX4D5M-010 handles on the line

This is a 1/8 DIN panel-mount PID controller from Omron's E5EC-T series, accepting inputs from RTDs, thermocouples (B, E, J, K, L, N, PLII, R, S, T, U, W), and analog signals (0–20 mA, 0–10 VDC) across a span of -200°C to 2300°C or the equivalent process variable. It drives loads through four relay outputs plus a voltage output for an external SSR — enough for dual-zone heater control with alarm or event outputs on the relays. The built-in heater fault detection and event input let it flag a broken heater element or accept a remote reset/override signal, which is useful on molding and packaging lines where a dead heater stops production.

Mounting, wiring, and environmental fit

Panel cutout is 92.00 mm x 45.00 mm — the standard 1/8 DIN footprint. Screw-terminal connections, no special tooling needed. Runs on 24 VAC or 24 VDC, so it ties directly into a common control-transformer or DC bus without an extra power supply. The front panel is rated IP66 — dust-tight and water-resistant — which means it survives washdown cycles in food, beverage, or pharmaceutical areas without a cover. Operating range is -10°C to 55°C, so it's fine inside a non-conditioned enclosure as long as the ambient stays below that ceiling.

Lifecycle and sourcing reality

This is a standard fast mover in the 1/8 DIN PID space.

MPN
E5EC-TQX4D5M-010