Skip to main content
Siemens 3RK1325-6LS41-1AA3

Siemens 3RK1325-6LS41-1AA3 SIRIUS Reversing Starter, IP65, 5

MPN 3RK1325-6LS41-1AA3
NRND

Siemens SIRIUS reversing starter, 3RK1325-6LS41-1AA3, IP65, AS-Interface, 5.5 kW at 400 V, trip classes 5/10/15/20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1325-6LS41-1AA3 specifications
ParameterValue
IP ratingIP65
Mountingscrew fixing
Depth159 mm
Width294 mm
Height215 mm
Trip classCLASS 5, 10, 15, 20

Product details

The Siemens SIRIUS 3RK1325-6LS41-1AA3 is a reversing motor starter designed for direct-on-line reversing duty of three-phase motors up to 5.5 kW at 400 V or 7.5 hp at 460/480 V, with a 10 hp rating at 575/600 V. Communication is over AS-Interface (the AS-Interface protocol is confirmed), with device addressing via an M12 plug. Four digital inputs are onboard for local limit switches or pushbuttons, and the main power circuit connects via a HAN Q4/2 plug conforming to ISO 23570.

Ratings that drive the selection decision

The 24 V DC supply (20.4 to 28.8 V range, max permissible 31.6 V, min permissible 26.5 V) powers the AS-Interface bus and the starter's logic. The 85 ms ON-delay and 65 ms OFF-delay are fixed — not adjustable — so factor those into your sequence timing if the starter is part of a safety-related interlock chain. Trip class is selectable among CLASS 5, 10, 15, and 20 — that's the maximum time in seconds the overload relay allows before tripping under a locked-rotor condition. Class 10 is the standard for general-purpose motor starting; Class 20 buys you headroom for high-inertia loads like fans or centrifuges. The starter does not support direct start (only reversing), but it does support reverse starting. Mounting is flexible — vertical, horizontal, or flat — though the recommended orientation is horizontal. Screw fixing is the fastening method. The unit measures 294 mm wide, 215 mm high, and 159 mm deep, so check that your enclosure or machine frame has clearance for the width, especially if ganging multiple starters side by side.

Environmental and lifecycle posture

The IP65 enclosure is the first line of defence, but the internal clearance and creepage distances are designed for Pollution Degree 3.

MPN
3RK1325-6LS41-1AA3