Skip to main content
Siemens 3RP1540-1AN31

Siemens 3RP1540-1AN31 SIRIUS Time Relay, 200-240 VAC, 0.05-6

MPN 3RP1540-1AN31

Siemens SIRIUS 3RP1540-1AN31 time relay, 200-240 V AC 50/60 Hz, adjustable 0.05-600 s, 1 changeover contact, 5 A thermal current, screw and snap-on mounting onto 35 mm DIN rail.

$125.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RP1540-1AN31 specifications
ParameterValue
IP ratingIP20
Depth91 mm
Width22.5 mm
Height83 mm
Recovery time150 ms

Product details

The Siemens SIRIUS 3RP1540-1AN31 is a single-function time relay with an adjustable ON-delay range of 0.05 to 600 seconds, powered by 200-240 V AC at 50/60 Hz. Its 5 A thermal current rating and 1 changeover contact handle control-signal switching in motor starter and conveyor interlock circuits.

The 200-240 V AC control supply is the standard European industrial voltage — common across SIRIUS contactor coils and PLC power supplies — so this relay shares the same bus without a separate transformer. The 0.05-600 s adjustable time range covers short blast-timer sequences (conveyor jog) through long pump-drain delays; the 150 ms recovery time means it resets fast enough for cyclic operations under 7 cycles per minute. Contact ratings at 24 V (1 A,), 125 V (0.2 A,), and 250 V (0.1 A,) define the switching limit for each voltage — use the 24 V figure for PLC digital inputs, the 250 V figure for contactor coils within that current.

Panel integration

The 22.5 mm width occupies one standard module slot; depth of 91 mm and height of 83 mm fit within typical 120 mm deep enclosures. Terminal tightening torque is 0.8-1.2 N·m for stranded wire 20-14 AWG. Basic insulation means it is suitable for control circuits within an earthed enclosure, not for direct line-side isolation.

MPN
3RP1540-1AN31