Skip to main content
Siemens 3RW4074-6BB45

Siemens 3RW4074-6BB45 SIRIUS Soft Starter, 280 A, 230 V

MPN 3RW4074-6BB45

Siemens SIRIUS 3RW4074-6BB45 soft starter, S12 frame, 280 A at 40 °C, 230 V 50/60 Hz, screw fixing, busbar main circuit connection.

$3,149.60 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW4074-6BB45 specifications
ParameterValue
Mountingscrew fixing
Depth278 mm
Width160 mm
Height230 mm

Product details

Continuous current and derating — what 280 A really means for the motor

The 3RW4074-6BB45: Rated 280 A at 40 °C, this soft starter handles a motor of roughly 160 kW at 230 V — but only if the enclosure ambient stays at or below 40 °C. At 50 °C the continuous rating drops to 248 A; at 60 °C it falls to 215 A. The derating temperature threshold is 40 °C, so any panel with internal temperature rise above that must be factored into the motor full-load current. Pollution degree 3 per IEC 60947-4-2 means the unit tolerates conductive dust and humidity typical of industrial floors — no need for a sealed enclosure unless washdown is present.

Termination and wiring — main circuit and control

Main circuit termination accepts stranded cable 70–240 mm² and finely stranded 50–240 mm², plus busbar connection. For North American wire sizes, the front clamping point takes 3/0–600 kcmil and the back clamping point 250–500 kcmil. Using both clamping points accepts min. 2x 2/0 to max. 2x 500 kcmil. Maximum motor cable length is 300 m — beyond that, capacitive charging current may cause nuisance tripping or reduce the soft starter's ability to limit inrush. Mounting is screw fixing. The S12 frame measures 160 mm wide, 230 mm high, 278 mm deep. Clearances: 100 mm upward, 75 mm downward, 5 mm at the sides.

Protection and control features

Built-in motor overload protection and intrinsic device protection eliminate the need for a separate overload relay in most installations. Adjustable current limitation lets you set the starting current between 20% and 100% of the soft starter's rated current — useful when starting into a limited supply transformer or generator. Minimum load is 20%. External reset input allows remote fault clearing from a PLC or pushbutton station. Thyristor-based with inside-delta circuit not supported. Operating frequency is 50–60 Hz; rated insulation voltage is 600 V.

MPN
3RW4074-6BB45