Skip to main content
Siemens 6ES7151-7FA00-0AB0

Siemens 6ES7151-7FA00-0AB0 ET200S DP Master, 244 Byte I/O

MPN 6ES7151-7FA00-0AB0

Siemens ET200S, PROFIBUS DP master module, 6ES7151-7FA00-0AB0, 244 byte inputs/outputs, isolated RS485, 64 KB work memory, supports FBD, LAD, STL, SCL.

$674.37 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7151-7FA00-0AB0 specifications
ParameterValue
Product typeSFB
Depth75 mm
Width60 mm; DP master module: 35 mm
Height119.5 mm
Backup time6 wk; At 40 °C ambient temperature, typically
Nesting levels8

Product details

PROFIBUS DP master for ET200S — 244 byte I/O, isolated RS485

The 6ES7151-7FA00-0AB0 is the PROFIBUS DP master interface module for the Siemens ET200S distributed I/O system. It handles 244 bytes of process input data and 244 bytes of process output data over an isolated RS485 physical layer, making it the communication gateway between the ET200S station and a higher-level DP master. The module supports programming in FBD, LAD, and STL, with SCL available as an optional add-on.

Integrated work memory and retentive data

The module carries 64 kbytes of integrated work memory, which the evidence notes accommodates approximately 10 K instructions. The backup time for retentive data is 6 weeks at 40 °C ambient, so a powered-down station holds its parameters through a typical plant outage without external battery support. Retentive data — inputs, outputs, memory bits, DBs, timers, and counters — must be restarted at each restart, which is normal for an ET200S slave interface that re-synchronises with the DP master on power-up.

Panel fit and DP master variant

The module body is 60 mm wide and 119.5 mm high, with the DP master sub-module occupying a 35 mm slot within that footprint. It snaps onto the DIN rail in the ET200S station, and the isolated RS485 interface means the DP line can run a different ground reference from the backplane without coupling noise into the I/O bus. SYNC/FREEZE is supported, so the module can synchronise output updates across multiple ET200S stations for coordinated motion or process steps. Routing is also supported, allowing the DP master to pass telegrams between subnets.

MPN
6ES7151-7FA00-0AB0