Mitsubishi Electric FR-D720-0.1K
MPNFR-D720-0.1K
FR-D700 Inverter
$208.00Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Type | Easy and compact inverter FREQROL-D700 series three-phase 200V |
| Product type | FR-D700 Inverter |
| Voltage | 3-phase 200 ~ 240V |
| AC voltage allowable variation | 170 ~ 264V 50Hz / 60Hz |
| Voltage (frequency characteristic) | Base frequency 0 ~ 400Hz any setting possible, constant torque reduction torque pattern can be selected |
| Rated input AC voltage and frequency | 3-phase 200 ~ 240V 50Hz / 60Hz |
| Current | 0.8 |
| Overload current rating | 150% 60s, 200% 0.5s (inverse time characteristics) |
| Power supply | Voltage class : Three-phase 200V class |
| Power supply capacity | 0.4 |
| Applicable motor capacity | 0.1kW |
| Frequency accurac | Analog input : Within ± 1% of the maximum output frequency (25 °C ± 10 °C) |
All specifications+40 ▾
| Parameter | Value |
|---|---|
| Output frequency range | 0.2 ~ 400Hz |
| Frequency setting resolution | Analog input : 0.06Hz / 60Hz (terminal 2,4: 0 ~ 10V / 10bit), 0.12Hz / 60Hz (terminal 2,4: 0 ~ 5V / 9bit), 0.06Hz / 60Hz (terminal 4: 0 ~ 20mA / 10bit) |
| Frequency permissible variation | ± 5% |
| Frequency setting signal analog input terminal points | 2 points |
| Protocol | RS-485, Modbus RTU |
| Analog input terminal specifications | Terminal 2: 0 ~ 10V, 0 ~ 5V can be selected, terminal 4: 0 ~ 10V, 0 ~ 5V, 4 ~ 20mA can be selected |
| Output terminal (relay output) number | 1 point |
| Input terminal selection possible signal | Multi-speed selection, remote setting, second function selection, terminal 4 input selection, JOG operation selection, PID control valid terminal, external thermal input, PU- external operation switch, V / F switching, output stop, start self-holding selection, positive rotation, reverse rotation command, inverter reset, PUNET change operation, external -NET change operation, command rights switching, inverter operation enable signal, PU operation Pr.178 ~ any signal from the external interlock Pr.182 (input terminal function selection) selected by the |
| Output terminal points for display meter | 1 point |
| Input signal terminal points (contact input) | 5 points |
| Output terminal specifications for display meter | FM: up to 2.4kHz |
| Output signal | Output terminal (open collector output) Number : : 1 point |
| Ambient humidity | Less than 90% RH (non-condensing) |
| Altitude, vibration | 1000m or less above sea level · 5.9m / s2 or less |
| Shipping weight | 3 Kg |
| Output | Rated capacity (kVA) : 0.3 |
| Display | control panel Operating condition : Output frequency, output current (steady), output voltage, frequency setting value, cumulative energization time, actual operation time, the converter output voltage, the regenerative brake duty, electronic thermal load factor, output current peak value, the converter output voltage peak value, the motor load factor, PID target value, PID measured value, PID deviation, the inverter input and output terminal monitor, output power, integrated power, motor thermal load factor, inverter thermal load factor, it can be selected from the PTC thermistor resistance value |
| Atmosphere | Indoor (no corrosive gas, flammable gas, oil mist, dust and dirt) |
| DC braking | Operating frequency (0 to 120 Hz), operation time (0 to 10s), the operating voltage (0-30%) Variable |
| Environment | Ambient temperature : -10 °C ~ + 50 °C (No freezing) (-10 °C ~ + 40 °C when the total closure structure specification) |
| Manufacturer | Mitsubishi Electric |
| Start signal | Forward and reverse individual, start signal self-holding input (3-wire input) can be selected |
| Torque boost | Manual torque boost |
| Digital input | Operation panel, input by the parameter unit, frequency setting unit selectable |
| Cooling system | Self-cooling |
| Starting torque | 150% more than if you set the slip correction in the (1Hz at the time) ... general-purpose magnetic flux vector control |
| Abnormal contents | Display an abnormal content at the time of operation of the protection function, store the 8 doses abnormal contents (protective function just before the output voltage and current, frequency and cumulative energization time) |
| Estimated lead time | Usually ships in 1 - 10 working days. |
| Storage temperature | -20 °C ~ + 65 °C |
| Approximate mass | 0.5 |
| Control specification | control method : Soft-PWM control / high carrier frequency PWM control (V / F control, general-purpose magnetic flux vector control, optimum excitation control can be selected) |
| Operation specification | Operational function : Upper and lower limit frequency setting, frequency jump operation, external thermal input selection, instantaneous power failure restart operation, forward and reverse rotation prevention, remote setting, the second function, multi-speed operation, regeneration avoidance, slip compensation, operation mode selection, offline auto-tuning function, PID control, computer link operation (RS-485), optimum excitation control, power failure stop, speed smoothing control, Modbus-RTU |
| Regenerative braking torque | Maximum value and the acceptable usage : - |
| Output pin-selectable signal | During inverter operation, frequency arrival, overload alarm, output frequency detection, regenerative brake pre-alarm, electronic thermal pre-alarm, inverter operation ready, output current detection, zero current detection, PID lower limit, PID upper limit, PID forward reverse output, fan failure, FIN overheating pre-alarm, during a power failure deceleration, in PID control operation, in the PID output interruption, the safety monitor output, safety monitor output 2, during retry, life alarm, current average value monitor, remote output, minor fault output , abnormal output, abnormal output 3, Pr.190 any signal from the maintenance timer alarm, Pr.192, selected by the Pr.197 (output terminal function selection). |
| Protection and alarm function | during acceleration over-current, constant speed during the over-current, over-current during deceleration, acceleration during overvoltage, constant speed during overvoltage, during deceleration overvoltage, inverter protection thermal operation, motor protection thermal operation, fin overheat, input phase failure, start-up time of the output side earth (ground) fault overcurrent, output phase failure, external thermal operation, PTC thermistor operation, parameter error, PU missing generation, the number of retries over, CPU abnormal, brake transistor abnormality, inrush resistance overheat, analog input error, stop by the stall prevention , output current detection value over, safety circuit abnormality fan failure, overcurrent stall prevention, overvoltage stall prevention, PU stop, parameter write error, regenerative brake pre-alarm, electronic thermal pre-alarm, maintenance output, undervoltage, operation panel lock, in the password setting, while the inverter is reset, safety stop in |
| Protective structure (JEM 1030) | Closed form (IP20), all closed structure series will be IP40. |
| Stall prevention operation level | Operating current level can be set (0 to 200% variable), presence or absence can be selected |
| For meter output pin-selectable signal | Output frequency, output current (steady), output voltage, frequency setting value, the converter output voltage, the regenerative brake duty, electronic thermal load factor, output current peak value, the converter output voltage peak value, reference voltage output, motor load factor, PID target value, PID measured value, output power, PID deviation, motor thermal load factor, inverter thermal load factor selected by Pr.54 FM terminal function selection, pulse train output (1440 pulses / s / full scale) |
| Acceleration and deceleration time setting | 0.1 ~ 3600s (acceleration and deceleration individually configurable), straight or S-shaped acceleration and deceleration mode can be selected |
| Output pin-selectable signal (when the option is installed) | Built-in options not be mounted |
MPN
FR-D720-0.1K