Omron E2Q6 series, E2Q6-N20F3-H, flush-mount inductive sensor, 20 mm sensing distance, 150 Hz, NO/NC, terminal block, IP67.
| Parameter | Value |
|---|---|
| Series | E2Q6 |
| Parameter | Value |
|---|---|
| Sensing distance, max. | 20 mm |
| Parameter | Value |
|---|---|
| Operating voltage, max. | 30 V |
| Operating voltage, min. | 10 V |
| Termination type | Terminal Block |
| Parameter | Value |
|---|---|
| Switching frequency | 150 Hz |
| Load current | 200 mA |
| Parameter | Value |
|---|---|
| Mounting type | Flush Mount |
| Length | 118 mm |
| Housing material | Plastic |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| IP protection rating | IP67 |
Omron's E2FQX10F1 is a cylindrical M30 unit with a 2 m cable and 10 mm range, requiring different cutouts and wiring than the rectangular E2Q6. For a BOM that already uses the E2Q6, stick with this rectangular form factor. The E2FQX10F1 is not a direct second-source.
No. The E2FQX10F1 is a cylindrical M30 with a 2 m cable; the E2Q6 is rectangular with terminal block. They require different cutouts and wiring.
No related articles