Skip to main content
Siemens 3RK1901-1NR12

Siemens 3RK1901-1NR12 AS-i M12 Branch, IP67/68/69K, 4A

MPN 3RK1901-1NR12

Siemens 3RK1901-1NR12 AS-Interface M12 branch feeder, flat cable transition to M12, 2 m cable, IP67/68/69K, 4 A, screw fixing.

$21.72 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1901-1NR12 specifications
ParameterValue
IP ratingIP67
Mountingscrew fixing
Temp storage max85 °C
Temp storage min-25 °C
Temp operating max75 °C
Temp operating min-25 °C

Product details

What this AS-i M12 branch does that a plain tee cannot

The 3RK1901-1NR12 is an AS-Interface M12 branch feeder that transitions the AS-i flat cable to a standard M12 connector, carrying both the AS-i signal and power on the same cable — no separate Uaux line needed. Rated for 4 A continuous contact load, it powers a sensor or actuator node directly from the AS-i bus without an additional power supply tap. The insulation-piercing method taps into the flat cable without stripping or cutting the feeder — the branch installs live if the line is already powered, but the note says the cable must not end in the feeder, meaning this is a pass-through tap, not a termination point.

Sealing and mounting for wet or washdown zones

IP67/68/69K rating means the M12 socket and the flat-cable entry both withstand high-pressure washdown and temporary submersion — food-and-bev or chemical processing lines where a standard IP67 tee would fail at the cable gland. Screw fixing secures the branch to a panel or machine frame, not just dangling on the cable — the mounting point takes the mechanical strain off the M12 connection. Ambient range -25 to +75 °C covers freezer-floor to hot-motor-zone installations; storage tolerance extends to +85 °C.

Pinout and voltage — what connects where

M12 socket assignment: pin 1 carries AS-i '+', pin 3 carries AS-i '-' — standard AS-i pinout for a 4-pin M12 sensor/actuator cable. Operating voltage follows the AS-Interface specification at 26.5 to 31.6 V — the branch does not regulate or filter, it just passes bus power through to the M12 node. The 2 m cable is factory-moulded with an angled M12 socket, so the branch arrives as a single assembly — no field wiring of the M12 connector required.

MPN
3RK1901-1NR12