Skip to main content
Siemens 3RQ4018-2AM08-0AX0

Siemens 3RQ4018-2AM08-0AX0 SIRIUS Coupling Relay, 24 V DC, 6

MPN 3RQ4018-2AM08-0AX0
Active

Siemens SIRIUS 3RQ4 coupling relay, 3RQ4018-2AM08-0AX0, output coupler with integrated relay, 24 V DC (0.7-1.25 x Us), 1 change-over contact, spring-loaded push-in terminal, width 6.2 mm, thermal current 6 A.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RQ4018-2AM08-0AX0 specifications
ParameterValue
SeriesSIRIUS 3RQ4 coupling relays, narrow design

Product details

The Siemens 3RQ4018-2AM08-0AX0 is an output coupler relay from the SIRIUS 3RQ4 family, narrow design. It packs a 24 V DC coil (pick-up range 0.7–1.25 x Us), a single change-over contact, and spring-loaded push-in terminals into a 6.2 mm wide housing — that's the narrowest slice in the SIRIUS coupling relay line, sized for dense DIN-rail panels where every millimeter of rail counts. Rated thermal current is 6 A, meaning the contact path is sized for signal-level loads and small auxiliary circuits — think PLC digital outputs driving contactor coils, indicator lamps, or solenoid valves. The push-in terminal accepts solid or ferruled stranded wire without a tool; strip to 8–10 mm and seat it. No screw torque to verify, no vibration loosening over time.

RoHS compliance is confirmed since 26 September 2024, covering the substance restrictions under Directive 2011/65/EU. REACH Article 33 information is available on request per the current candidate list.

At 6.2 mm wide, ten of these fit in the space of one typical 62 mm terminal block — useful for grouping multiple isolated output channels in a single slice. The spring-loaded push-in terminals reduce wiring time compared to screw-clamp variants; no calibration of torque drivers, no re-torquing after thermal cycling. Coil draws from a 24 V DC supply; the 0.7–1.25 x Us range means it holds in at 16.8 V and must not exceed 30 V. If your control voltage sags during motor starting, verify the DC bus stays above dropout. The single change-over contact (1 CO) gives both N/O and N/C paths — useful for signaling back to a PLC input while switching the load.

What the 6 A thermal current means for your load

The 6 A thermal current (Ith) is the continuous current the contact can carry in free air at 40 °C ambient. For resistive loads (AC-1), derating is minimal — you can switch 6 A all day. For inductive DC loads or motor starters, the making/breaking capacity is lower; the contact is designed for pilot duty, not main power switching. If your load is a 24 V DC solenoid pulling 2 A inrush, this relay handles it cleanly. If you're switching a 1.5 kW motor contactor coil, verify the inrush stays under the contact's rated making capacity.

MPN
3RQ4018-2AM08-0AX0