Skip to main content
Mitsubishi Electric GT1045-QSBD

Mitsubishi GT1045-QSBD GOT1000 HMI, 4.7" QVGA STN LCD

MPN GT1045-QSBD

Mitsubishi GOT1000 series, GOT body, GT1045-QSBD, 4.7 type STN color LCD, QVGA 320x240 dots, 256 colors, White LED backlight, 128KB SRAM, RS-232 1ch, USB device 1ch.

$764.00 – $1,562.63 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GT1045-QSBD specifications
ParameterValue
SeriesGOT 1000
Battery typeGT11-50BAT lithium battery
Display typeSTN color LCD
Backlight typeLED (no replacement required)
Frequency8.4 to 150 Hz> Acceleration 4.9 m / s 2
Installation locationControl panel inside
Temp storage max39 °C
Temp storage min10 °C
Temp operating max39 °C
Temp operating min10 °C
Pollution degree2 or less
ColorWhite LED
Channels1 ch
ResolutionQVGA: 320 x 240 [dots]
Size4.7 type
Cooling methodNatural cooling
Touch panel methodMatrix resistive membrane type

Product details

Lifecycle status and procurement posture

The GT1045-QSBD: If a replacement is needed, a parametric search within the GOT1000 family for a similar display size and resolution (QVGA 320 x 240 dots, 4.7 type) is the starting point, but pin-compatibility is not guaranteed without a board-level review.

Display and operator interface specifications

The 4.7-type STN color LCD delivers QVGA resolution (320 x 240 dots) in 256 colors, with a White LED backlight rated for no replacement over the unit's service life. LCD brightness is 150 cd/m², and the viewing angle spans 50 degrees left and right, 40 degrees up, and 70 degrees down when displayed horizontally — sufficient for panel-mount installations where the operator stands directly in front. Minimum key size is 16 x 16 dots per key, which sets the touch-target density for screen layouts. The buzzer output is a single tone with adjustable long/short duration or can be disabled entirely.

Memory, backup, and communication ports

Onboard SRAM capacity is 128 KB, and the unit accepts a GT10-50FMB type memory board for expansion. Backup targets include clock data, alarm history, recipe data, and time action setting values, powered by a GT11-50BAT lithium battery with a typical lifespan of about 5 years at 25 °C ambient. Communication interfaces include one RS-232 channel and one USB device channel (USB Mini-B connector). The RS-232 port supports transmission rates from 4800 to 115200 bps, configurable per the connected PLC or controller.

Environmental and electrical ratings for panel fit

Operating temperature is 0 to 55 °C in horizontal mounting, derated to 0 to 50 °C in vertical orientation. The unit is self-cooling (no fan), rated for pollution degree 2 or less, and must be installed at an elevation of 2000 m or less. Use atmosphere excludes oil smoke, corrosive gas, flammable gas, and conductive dust; direct sunlight during storage is also excluded. Withstand voltage is AC 500 V for 1 minute between the power terminal package and ground. Grounding must be D class (100 Ω or less), with provision for connection to the board when chassis grounding is not possible. Inrush current is 15 A or less at 2 ms maximum load. Shock resistance conforms to JIS B 3502 and IEC 61131-2 at 147 m/s², three times each in X, Y, and Z directions with an 11 ms pulse. Vibration tolerance is 4.9 m/s² over 8.4 to 150 Hz. Noise tolerance is tested by noise simulator at 1000 Vp-p, 1 μs width, 30 to 100 Hz.

MPN
GT1045-QSBD