Skip to main content
Mitsubishi Electric MR-J4-10B

Mitsubishi MR-J4-10B MELSERVO-J4 Servo Amplifier, 0.1 kW

MPN MR-J4-10B

Mitsubishi MELSERVO-J4 series, MR-J4-10B servo amplifier, 0.1 kW motor output, 0.9 A rated current, STO safety, built-in dynamic brake.

$695.00 – $1,117.64 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MR-J4-10B specifications
ParameterValue
Product typeMELSERVO-J4 series Servo Amplifier
VoltageThree-phase AC170 V
Current0.2 A
Temp operating max65 °C
Temp operating min-20 °C
Weight0.8 Kg

Product details

Integrator's note on the MR-J4-10B

The Mitsubishi MR-J4-10B is a MELSERVO-J4 series servo amplifier rated for 0.1 kW motor output, drawing a rated current of 0.9 A from a single-phase or three-phase AC200 V to 240 V supply at 50/60 Hz. It uses sinusoidal-wave PWM current control and communicates over an SSCNET III/H motion network, which means it drops into a Mitsubishi motion system with deterministic cycle times — no pulse-train step-loss worries on a high-speed pick-and-place or a rotary knife. The built-in dynamic brake stops the motor on a fault or STO event without an external braking resistor for most inertial loads up to this frame size. STO (Safe Torque Off) per IEC/EN 61800-5-2 is standard, with a diagnostic coverage of 97.6% (medium DC level) — enough for SIL 2 / PL d safety circuits guarding a hazard zone.

The amplifier is self-cooled with an IP20 open-type enclosure — it needs clearance above and below for convection airflow inside a panel. Rated for indoor use only, no corrosive gas or oil mist, and up to 2000 m elevation. Ambient humidity must stay at or below 90% RH non-condensing. Vibration resistance is 5.9 m/s² over 10 to 55 Hz in each axis.

Protection and diagnostics

Protective functions cover over-current, regenerative overvoltage, overload (electronic thermal), motor overheating, encoder errors, undervoltage, instantaneous power failure, overspeed, and excessive error. The drive recorder and machine diagnostic functions log fault events — useful for a field-service tech trying to catch an intermittent stall on a conveyor index.

MPN
MR-J4-10B