Skip to main content
Siemens 4EP3905-0AK00

Siemens 4EP3905-0AK00 Commutating Choke, 180A, 400V AC, 3-Ph

MPN 4EP3905-0AK00

Siemens 4EP3905-0AK00 commutating choke for converter duty, 3-phase, 400V AC, 180A rated / 200A max, 0.03 mH, IP00, flat-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP3905-0AK00 specifications
ParameterValue
IP ratingIP00
Depth0.123 m
Width0.219 m
Height0.179 m

Product details

The Siemens 4EP3905-0AK00 is a three-phase commutating choke (line reactor) designed for converter input or output circuits. Rated for a 40 °C ambient with Class B insulation (130 °C hot-spot per IEC 60085), the choke dissipates 69 W in the coil and 13 W in the iron core at full load — total 82 W of heat to vent inside the enclosure.

Where it goes — panel and circuit fit

Dimensions are 0.219 m wide, 0.179 m tall, and 0.123 m deep. The main circuit connects via flat-type terminals (flat connector) — expect busbar or large-gauge ring-tongue lugs, not spring-cage or screw-clamp. Verify the terminal spacing against your existing busbar layout before panel layout. This is a three-phase device; the 0.5% impedance is low enough that it won't cause significant voltage drop under normal load, but it will limit fault-current rise rate. Typical placement is between the line supply and the converter input (or between the converter output and the motor, depending on the drive topology). IP00 means no integral cooling fan — the cabinet's forced-air or natural convection must handle the 82 W heat load.

MPN
4EP3905-0AK00