Skip to main content
Siemens 4EU3022-5BA00-0AA0

Siemens 4EU3022-5BA00-0AA0 Commutating Choke, 3-Phase, 500V,

MPN 4EU3022-5BA00-0AA0

Siemens 4EU3022-5BA00-0AA0 commutating choke for converter, 3-phase, 500V AC, 280A AC max, 0.098 mH, IP00, thermal class H, flat-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU3022-5BA00-0AA0 specifications
ParameterValue
IP ratingIP00
Depth0.211 m
Width0.3 m
Height0.269 m

Product details

Commutating Choke for Converter Duty

The Siemens 4EU3022-5BA00-0AA0 is a 3-phase commutating choke designed for converter applications, rated at 500 V AC with a maximum AC current of 280 A at 50 Hz. It provides an inductance of 0.098 mH and a relative inductive voltage drop of 4% at rated current, voltage, and frequency. The choke is designed to limit di/dt and smooth commutation notches in the DC link of variable-speed drives and rectifier systems. Built to thermal class H per IEC 60085, the choke handles a coil power loss of 220 W and an iron core loss of 110 W at a 40 °C ambient temperature.

The 280 A AC maximum current (Ithmax) at 50 Hz defines the thermal continuous rating — the choke can carry this current indefinitely without exceeding its temperature rise limits. The 252 A AC operational current (ILN) is the rated continuous current under nominal conditions, and the 343.1 A DC rated value reflects the current-carrying capability in DC link applications. The 350 A peak current rating indicates the short-duration surge capacity the choke can withstand without saturating. The 4% relative inductive voltage drop (Uk) at rated current is a key parameter for system designers: it determines the voltage sag across the choke under load and must be accounted for in the DC link voltage budget. The 0.098 mH inductance value is relatively low, typical for commutating chokes that are sized to limit switching transients rather than provide significant energy storage.

The choke measures 0.3 m wide, 0.269 m high, and 0.211 m deep. The main circuit connections use flat-type terminals, which require busbar or flat-cable lugs — not round wire ferrules. At 220 W coil loss plus 110 W iron loss, the total 330 W heat dissipation must be ventilated or cooled within the enclosure. The thermal class H insulation (180 °C hot-spot rating) gives headroom for overloads, but the 40 °C ambient rating is the design point for continuous operation.

MPN
4EU3022-5BA00-0AA0