Skip to main content
Siemens 6ES7410-5FM08-0AB0

Siemens 6ES7410-5FM08-0AB0 S7-400 CPU, 450 MHz, PROFIsafe

MPN 6ES7410-5FM08-0AB0

Siemens S7-400 CPU 410-5H, 6ES7410-5FM08-0AB0, 450 MHz multi-processor, 2048 byte I/O, PROFIsafe, ATEX II 3G, CCC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7410-5FM08-0AB0 specifications
ParameterValue
Product typeSFB
InterfacePluggable synchronization submodule (FO)
AS-InterfaceVia add-on, Yes
Depth219 mm
Width50 mm
Height290 mm
Nesting levels7
Required slots2

Product details

CPU 410-5H for redundant safety applications

This is the Siemens S7-400 CPU 410-5H, order code 6ES7410-5FM08-0AB0, built for redundant (H) systems with integrated safety. It runs a 450 MHz multi-processor system, which means the CPU handles both standard logic and safety functions on the same hardware without a separate F-CPU. The 2048-byte input and 2048-byte output process image handles large I/O configurations common in process plants. PROFIsafe is native on this CPU, so safety-related F-signals travel over the same PROFIBUS or PROFINET cable as standard I/O. That saves a separate safety bus and simplifies wiring in a safety instrumented system. The SFB type (system function block) supports isochronous real-time communication for deterministic response.

Fieldbus and network interfaces

PROFIBUS DP is onboard, with DPV1 support for cyclic and acyclic data exchange. For each interface, the CPU handles 8 (SFC 59) and 8 (SFC 58) operations, plus 8 (SFC 13) and 1 (SFC 103) per interface. That's enough for a medium-sized DP line with multiple slaves and topology diagnostics. TCP/IP and UDP are supported natively, so the CPU talks directly to plant networks without an extra CP. MODBUS is available via an add-on module — not embedded, but the option is there if legacy devices need it. S7 routing is enabled, letting the CPU forward PG/PC communications across subnets. The system logging function (SysLog) sends diagnostics via TCP to up to 4 configurable receivers, with a buffer capacity of 3,200 entries. That's useful for remote fault analysis without a dedicated HMI.

Compliance and certifications for global projects

This CPU carries CE mark, cULus, and CCC (China Compulsory Certification) — so it's accepted in North America, Europe, and China without additional agency review. The ATEX II 3G Ex ec IIC T4 Gc rating means it can be installed in Zone 2 gas environments (explosive atmosphere present less than 1% of operating time). That's typical for petrochemical skids and refinery auxiliary panels. The part is isolated, meaning the CPU logic is galvanically separated from the I/O bus — important for ground-loop prevention in mixed-voltage panels.

MPN
6ES7410-5FM08-0AB0