Skip to main content
Siemens 6ES7505-0KA00-0AB0

Siemens 6ES7505-0KA00-0AB0 PS 25W, 24 V DC, for S7-1500

MPN 6ES7505-0KA00-0AB0
Active

Siemens SIMATIC S7-1500 system power supply PS 25W, 24 V DC, 1.3 A rated input, 25 W infeed to backplane bus, IP20, active production.

$153.28 – $275.27 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7505-0KA00-0AB0 specifications
ParameterValue
IP ratingIP20
Depth129 mm
Width35 mm
Height147 mm

Product details

Backplane bus supply for S7-1500 racks

The Siemens 6ES7505-0KA00-0AB0 is the 25 W system power supply that feeds the backplane bus of a SIMATIC S7-1500 rack — it converts the 24 V DC field supply into the internal logic voltage the CPU and I/O modules need to communicate. Rated input is 1.3 A at 24 V DC, with a static permissible range of 19.2 V to 28.8 V DC and a dynamic window down to 18.5 V and up to 30.2 V DC — wide enough to ride through a sagging field supply without dropping the rack. It delivers 25 W to the backplane bus and dissipates 6.2 W of its own heat at nominal load — that loss sits inside the enclosure, so factor it into the panel thermal budget.

Protection and hold-up for dirty lines

Built-in short-circuit protection and reverse polarity protection mean the supply handles a miswired 24 V line or a downstream bus fault without letting the magic smoke out — a common headache in field-terminated panels. On a mains/voltage failure, the supply holds up the backplane bus for 20 ms — enough for a CPU with a retentive memory cycle to finish its current scan and enter a defined stop state before the rack browns out. Equipment protection class III with a protective conductor connection means it relies on SELV/PELV supply and the PE bond for fault clearing — standard for control cabinet installations.

DIN-rail fit and environmental limits

IP20 rated — it is open to the cabinet environment, so install it in a clean, dry enclosure; it is not sealed against washdown or dust ingress. Rated for installation altitudes up to 5 000 m, with restrictions above 2 000 m per the manual — the derating at high altitude is due to reduced air density for cooling.

This part carries an active lifecycle status — it is current-production from Siemens, not a phase-out or obsolete line. It is compatible with the SIMATIC S7-1500 platform and is configurable from STEP 7 V5.5 SP3 or TIA Portal V12 onward — no firmware upgrade needed for standard racks.

MPN
6ES7505-0KA00-0AB0