Schneider Electric Acti9 ID K, RCCB, 2P, 25 A, 300 mA, Type AC, 220-240 V AC, DIN-rail, IP20.
| Parameter | Value |
|---|---|
| Earth-leakage sensitivity (IΔn) | 300 mA |
| Earth-leakage protection class / type | Type AC |
| Earth-leakage trip time delay | Instantaneous |
| Residual-current tripping technology | Voltage independent |
| Parameter | Value |
|---|---|
| Rated current (In) | 25 A |
| Rated operational voltage (Ue) | 220...240 V AC 50 Hz |
| Poles description | 2P |
| Neutral pole position | Left |
| Network type | AC |
| Network frequency | 50 Hz |
| Rated insulation voltage (Ui) | 440 V AC 50 Hz |
| Rated impulse withstand voltage (Uimp) | 4 kV |
| Device location in system | Group incomer |
| Electrical durability | AC-1: 4000 cycles |
| Mechanical durability (operating cycles) | 5000 cycles |
| Parameter | Value |
|---|---|
| Product name | Acti9 ID K |
| Product / component type | Residual current circuit breaker (RCCB) |
| Product range / family | Acti9 |
| Device short name | ID K |
| Parameter | Value |
|---|---|
| Mounting support | DIN rail |
| Mounting mode | Clip-on |
| Control type | Toggle |
| Width in 9 mm modules | 4 |
| Terminal connections | Biconnect top or bottom 1...35 mm² rigid Biconnect top or bottom 1...25 mm² flexible |
| Wire stripping length | 14 mm for top or bottom connection |
| Terminal tightening torque | 3.5 N.m top or bottom |
| Width | 36 mm |
| Height | 81 mm |
| Depth | 68 mm |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -5...55 °C |
| Storage ambient temperature | -25...85 °C |
| IP degree of protection | IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529 |
| Pollution degree | 2 |
| Relative humidity | 95 % at 55 °C |
| Tropicalisation | 2 conforming to IEC 60068-1 |
| Parameter | Value |
|---|---|
| Standards | EN/IEC 61008-1 |
That makes it a fit for general-purpose socket circuits and lighting loads where no DC or pulsed DC fault content is expected.
IP20 body rating — fine for a dry indoor panel; the modular enclosure bumps that to IP40. Biconnect terminals accept up to 35 mm² rigid or 25 mm² flexible cable, with a 3.5 N.m tightening torque and 14 mm strip length.
Submit an RFQ through this listing. We source the part to order and confirm pricing and availability at quote time.
The part is designed to EN/IEC 61008-1, carries IP20 per IEC 60529, and is tropicalised to class 2 per IEC 60068-1. Specific RoHS/REACH declarations are available from Schneider's documentation portal.