Skip to main content
Schneider Electric EZC250H2150 — Circuit Breaker Accessories

Schneider Electric EZC250H2150 EasyPact EZC250H Circuit Brea

MPNEZC250H2150
Active

Schneider Electric EasyPact EZC250H series, EZC250H2150, 2-pole molded case circuit breaker, 150 A rated current, thermal-magnetic TM-D trip unit, 10–85 kA Icu breaking capacity, 550 V AC / 250 V DC.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

EZC250H2150 — Identification
ParameterValue
Product / component typeCircuit breaker
Range of productEasyPact
Device applicationDistribution
EZC250H2150 — Electrical
ParameterValue
Network type (AC/DC)AC DC
Rated current [In]150 A at 40 °C
Rated operational voltage [Ue]550 V AC 50/60 Hz conforming to IEC 60947-2 250 V DC conforming to IEC 60947-2
Rated insulation voltage [Ui]690 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage [Uimp]6 kV conforming to IEC 60947-2
Network frequency50/60 Hz
Poles description2P
EZC250H2150 — Protection & Performance
ParameterValue
Breaking capacity10 kA Icu at 550 V AC 50/60 Hz conforming to IEC 60947-2 25 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 30 kA Icu at 125 V DC 1P conforming to IEC 60947-2 30 kA Icu at 250 V DC 2P conforming to IEC 60947-2 36 kA Icu at 380 V AC 50/60 Hz conforming to IEC 60947-2 36 kA Icu at 400...415 V AC 50/60 Hz conforming to IEC 60947-2 85 kA Icu at 110...130 V AC 50/60 Hz conforming to IEC 60947-2 85 kA Icu at 220...240 V AC 50/60 Hz conforming to IEC 60947-2
Rated service breaking capacity [Ics]5 kA at 550 V AC 50/60 Hz conforming to IEC 60947-2 15 kA at 125 V DC conforming to IEC 60947-2 15 kA at 250 V DC conforming to IEC 60947-2 18 kA at 380 V AC 50/60 Hz conforming to IEC 60947-2 18 kA at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 12.5 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 42.5 kA at 110/130 V AC 50/60 Hz conforming to IEC 60947-2 42.5 kA at 220/230/240 V AC 50/60 Hz conforming to IEC 60947-2
Breaking capacity codeH
Trip unit technologyThermal-magnetic
Trip unit rating150 A at 50 °C
Trip unit nameTM-D
Protection typeShort-circuit protection Overload protection
Earth-leakage protectionWithout
Suitability for isolationYes conforming to IEC 60947-2
Utilisation categoryCategory A
Mechanical durability10000 cycles
Local signallingPositive contact indication
EZC250H2150 — Mechanical
ParameterValue
Connection pitch35 mm
Downside connectionFront
Upside connectionFront
Device short nameEasypact EZC250H
Control typeToggle
Mounting modeFixed
Mounting supportBackplate
Width105 mm
Height165 mm
Depth60 mm
EZC250H2150 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529
IK degree of protectionIK07 conforming to IEC 62262
Pollution degree3 conforming to IEC 60664-1 3 conforming to IEC 947-1
Operating ambient air temperature-25...70 °C
Storage ambient air temperature-35...85 °C
EZC250H2150 — Approvals
ParameterValue
StandardsJIS C8201-2-2 GB/T 14048.2 EN/IEC 60947-2 EN/IEC 60947-1

Product details

Rated 150 A at 40 °C (trip unit rated 150 A at 50 °C), it handles line currents up to that level in a 50/60 Hz AC or DC network. The breaking capacity varies with voltage: 85 kA Icu at 240 V AC, 36 kA at 400–415 V AC, 10 kA at 550 V AC, and 30 kA at 250 V DC — so on a 400 V panel this breaker clears a 36 kA fault without upstream coordination issues. The 35 mm pole pitch matches standard busbar and cable-lug spacing. Positive contact indication gives a visible break confirmation for isolation safety.

Designed and tested to JIS C8201-2-2, GB/T 14048.2, EN/IEC 60947-2, and EN/IEC 60947-1. IP20 finger-safe terminals, IK07 impact resistance.

Frequently asked questions

What are the key ratings for EZC250H2150?

Rated current 150 A at 40 °C, 2-pole, thermal-magnetic TM-D trip unit, breaking capacity 85 kA Icu at 240 V AC / 36 kA at 400–415 V AC / 10 kA at 550 V AC / 30 kA at 250 V DC, rated insulation voltage 690 V AC, operational voltage 550 V AC / 250 V DC.

MPN
EZC250H2150