Skip to main content
Log in
Schneider Electric EZC250H2225 — Circuit Breaker Accessories

Schneider Electric EZC250H2225 EasyPact EZC250H, 225 A, 2P,

MPNEZC250H2225
Obsolete

Schneider Electric EasyPact EZC250H series, EZC250H2225, 2-pole circuit breaker, 225 A rated current, thermal-magnetic TM-D trip unit, 10 kA Icu at 550 V AC, IP20, backplate mount.

Schneider Electric EZC250H2225 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

EZC250H2225 — Identification
ParameterValue
Product / component typeCircuit breaker
Range of productEasyPact
Device applicationDistribution
EZC250H2225 — Electrical
ParameterValue
Network type (AC/DC)AC DC
Rated current [In]225 A at 40 °C
Rated operational voltage [Ue]550 V AC 50/60 Hz conforming to IEC 60947-2 250 V DC conforming to IEC 60947-2
Rated insulation voltage [Ui]690 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage [Uimp]6 kV conforming to IEC 60947-2
Network frequency50/60 Hz
Poles description2P
EZC250H2225 — Protection & Performance
ParameterValue
Breaking capacity10 kA Icu at 550 V AC 50/60 Hz conforming to IEC 60947-2 25 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 30 kA Icu at 125 V DC 1P conforming to IEC 60947-2 30 kA Icu at 250 V DC 2P conforming to IEC 60947-2 36 kA Icu at 380 V AC 50/60 Hz conforming to IEC 60947-2 36 kA Icu at 400...415 V AC 50/60 Hz conforming to IEC 60947-2 85 kA Icu at 110...130 V AC 50/60 Hz conforming to IEC 60947-2 85 kA Icu at 220...240 V AC 50/60 Hz conforming to IEC 60947-2
Rated service breaking capacity [Ics]5 kA at 550 V AC 50/60 Hz conforming to IEC 60947-2 15 kA at 125 V DC conforming to IEC 60947-2 15 kA at 250 V DC conforming to IEC 60947-2 18 kA at 380 V AC 50/60 Hz conforming to IEC 60947-2 18 kA at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 12.5 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 42.5 kA at 110/130 V AC 50/60 Hz conforming to IEC 60947-2 42.5 kA at 220/230/240 V AC 50/60 Hz conforming to IEC 60947-2
Breaking capacity codeH
Trip unit technologyThermal-magnetic
Trip unit rating225 A at 50 °C
Trip unit nameTM-D
Protection typeShort-circuit protection Overload protection
Earth-leakage protectionWithout
Suitability for isolationYes conforming to IEC 60947-2
Utilisation categoryCategory A
Mechanical durability10000 cycles
Local signallingPositive contact indication
EZC250H2225 — Mechanical
ParameterValue
Connection pitch35 mm
Downside connectionFront
Upside connectionFront
Device short nameEasypact EZC250H
Control typeToggle
Mounting modeFixed
Mounting supportBackplate
Width105 mm
Height165 mm
Depth60 mm
EZC250H2225 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529
IK degree of protectionIK07 conforming to IEC 62262
Pollution degree3 conforming to IEC 60664-1 3 conforming to IEC 947-1
Operating ambient air temperature-25...70 °C
Storage ambient air temperature-35...85 °C
EZC250H2225 — Approvals
ParameterValue
StandardsEN/IEC 60947-2 GB/T 14048.2 EN/IEC 60947-1

Product details

Integrator's note on the EZC250H2225

The Schneider Electric EZC250H2225 is a 2-pole EasyPact EZC250H circuit breaker rated 225 A at 40 °C, with a thermal-magnetic TM-D trip unit handling short-circuit and overload protection. Breaking capacity hits 10 kA Icu at 550 V AC — enough for most distribution panels on 400 V systems where fault levels stay under that ceiling. The fixed backplate mount and front connections simplify panel layout; IP20 enclosure keeps fingers out but expects a sealed cabinet in wet areas.

At 400…415 V AC the breaker delivers 36 kA Icu, which coordinates well with downstream 25 kA-rated MCCBs in a typical 400 V distribution board. The 10 kA rating at 550 V AC covers the high-voltage end for 480 V line-to-line systems.

Fixed backplate mount, 105 mm wide, 165 mm tall, 60 mm deep. IK07 impact rating handles light tool drops during commissioning.

Frequently asked questions

Where can I buy EZC250H2225 and how do I get a price?

The EZC250H2225 is sourced to order against an RFQ through independent distribution. Submit a request for quote to confirm current availability and pricing.

What is the breaking capacity of EZC250H2225 at 400 V?

At 400…415 V AC the EZC250H2225 delivers 36 kA Icu per IEC 60947-2.

What compliance documentation does EZC250H2225 carry?

The EZC250H2225 is designed to EN/IEC 60947-2 and GB/T 14048.2 standards. It carries IP20 protection per IEC 60529 and IK07 impact rating per IEC 62262. The manufacturer provides standard compliance documentation (RoHS, REACH, UL, IEC) upon request.

MPN
EZC250H2225