Skip to main content
Log in
Schneider Electric EZC250H3100 — Circuit Breaker Accessories

Schneider Electric EZC250H3100 EasyPact EZC250H, 100 A, 3P,

MPNEZC250H3100
Active

Schneider Electric EasyPact EZC250H, EZC250H3100, 3-pole circuit breaker, 100 A rated current, TM-D thermal-magnetic trip unit, breaking capacity 10-85 kA, IP20, IK07.

Schneider Electric EZC250H3100 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

EZC250H3100 — Identification
ParameterValue
Product / component typeCircuit breaker
Range of productEasyPact
Device applicationDistribution
EZC250H3100 — Electrical
ParameterValue
Network type (AC/DC)DC AC
Rated current [In]100 A at 40 °C
Rated operational voltage [Ue]550 V AC 50/60 Hz conforming to IEC 60947-2 250 V DC conforming to IEC 60947-2
Rated insulation voltage [Ui]690 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage [Uimp]6 kV conforming to IEC 60947-2
Network frequency50/60 Hz
Poles description3P
EZC250H3100 — Protection & Performance
ParameterValue
Breaking capacity10 kA Icu at 550 V AC 50/60 Hz conforming to IEC 60947-2 25 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 30 kA Icu at 125 V DC 1P conforming to IEC 60947-2 30 kA Icu at 250 V DC 2P conforming to IEC 60947-2 36 kA Icu at 380 V AC 50/60 Hz conforming to IEC 60947-2 36 kA Icu at 400...415 V AC 50/60 Hz conforming to IEC 60947-2 85 kA Icu at 110...130 V AC 50/60 Hz conforming to IEC 60947-2 85 kA Icu at 220...240 V AC 50/60 Hz conforming to IEC 60947-2
Rated service breaking capacity [Ics]5 kA at 550 V AC 50/60 Hz conforming to IEC 60947-2 15 kA at 125 V DC conforming to IEC 60947-2 15 kA at 250 V DC conforming to IEC 60947-2 18 kA at 380 V AC 50/60 Hz conforming to IEC 60947-2 18 kA at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 12.5 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 42.5 kA at 110/130 V AC 50/60 Hz conforming to IEC 60947-2 42.5 kA at 220/230/240 V AC 50/60 Hz conforming to IEC 60947-2
Breaking capacity codeH
Trip unit technologyThermal-magnetic
Trip unit rating100 A at 50 °C
Trip unit nameTM-D
Protection typeOverload protection Short-circuit protection
Earth-leakage protectionWithout
Suitability for isolationYes conforming to IEC 60947-2
Utilisation categoryCategory A
Mechanical durability10000 cycles
Local signallingPositive contact indication
EZC250H3100 — Mechanical
ParameterValue
Connection pitch35 mm
Downside connectionFront
Upside connectionFront
Device short nameEasypact EZC250H
Control typeToggle
Mounting modeFixed
Mounting supportBackplate
Width105 mm
Height165 mm
Depth60 mm
EZC250H3100 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529
IK degree of protectionIK07 conforming to IEC 62262
Pollution degree3 conforming to IEC 60664-1 3 conforming to IEC 947-1
Operating ambient air temperature-25...70 °C
Storage ambient air temperature-35...85 °C
EZC250H3100 — Approvals
ParameterValue
StandardsEN/IEC 60947-2 EN/IEC 60947-1 GB/T 14048.2

Product details

The Schneider Electric EZC250H3100 is a 3-pole EasyPact EZC250H circuit breaker rated 100 A at 40 °C, with a thermal-magnetic TM-D trip unit for overload and short-circuit protection.

The EZC250H3100 carries an H breaking capacity code, with Icu values ranging from 10 kA at 550 V AC up to 85 kA at 110–130 V AC and 220–240 V AC. At the common 400–415 V AC level, it interrupts 36 kA. For DC circuits, it delivers 30 kA at 125 V DC (1P) or 250 V DC (2P).

Mounts fixed to a backplate with front-connect terminals on both line and load sides. The connection pitch is 35 mm. The 105 mm width and 165 mm height fit standard distribution-panel cutouts. Positive contact indication on the toggle gives a visual confirmation of the contact state — useful during LOTO procedures.

Frequently asked questions

Where can I buy EZC250H3100?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the closest pin-compatible alternative to EZC250H3100 in this component family?

Within the EasyPact EZC250H family, the key variant difference is the trip unit rating and breaking capacity code. The EZC250H3100 is a 100 A, H-capacity (high breaking) version. A lower breaking capacity (N or S code) or different amperage would change the fit for your fault-current requirements — verify the Icu at your system voltage before substituting.

What compliance documentation does this brand provide for EZC250H3100?

The breaker is certified to EN/IEC 60947-2, EN/IEC 60947-1, and GB/T 14048.2. It carries IP20 and IK07 protection ratings. Schneider Electric typically provides a Declaration of Conformity covering these standards upon request.

MPN
EZC250H3100