Skip to main content
Log in
Schneider Electric LC2K16017N7 — Contactors

Schneider TeSys K LC2K16017N7 Reversing Contactor, 16 A AC-3

MPNLC2K16017N7
Active

Schneider Electric TeSys K reversing contactor, 3P, AC-3 <= 440 V 16 A, 1 NC, 400...415 V AC coil, IP20.

Schneider Electric LC2K16017N7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LC2K16017N7 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control
LC2K16017N7 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-4
LC2K16017N7 — Contacts & Poles
ParameterValue
Pole configuration3P
LC2K16017N7 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC2K16017N7 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The LC2K16017N7 is a TeSys K reversing contactor from Schneider Electric — a 3-pole unit rated for AC-3 duty up to 16 A at <= 440 V AC. The reversing pair is preassembled with a power busbar, so it arrives ready to bolt in for a motor-reversing circuit.

AC-4 is also listed, which covers inching and plugging duty where the contactor opens under full locked-rotor current.

Deployment context

It's sized for a standard 90 mm wide footprint, so it fits the usual TeSys K mounting grid alongside overload relays and terminal blocks.

Frequently asked questions

What are the key ratings for this reversing contactor?

It is a 3-pole reversing contactor rated AC-3 <= 440 V 16 A with a 400...415 V AC coil. It carries one NC auxiliary contact and is IP20 finger-safe.

What is the mounting and form factor?

It's a DIN-rail mount unit, 90 mm wide, 58 mm high, 57 mm deep, part of the TeSys K series. The reversing busbar is preassembled.

MPN
LC2K16017N7