Skip to main content
Log in
Schneider Electric LC2K16015E7 — Contactors

Schneider Electric LC2K16015E7 TeSys K Reversing Contactor,

MPNLC2K16015E7
Obsolete

Schneider Electric TeSys K reversing contactor, LC2K16015E7, 3P, AC-3 16A at 440V, 48V AC coil, IP20.

Schneider Electric LC2K16015E7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LC2K16015E7 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control
LC2K16015E7 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-4 AC-3
LC2K16015E7 — Contacts & Poles
ParameterValue
Pole configuration3P
LC2K16015E7 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC2K16015E7 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The Schneider Electric LC2K16015E7 is a TeSys K reversing contactor, 3P, rated AC-3 ≤ 440 V 16 A, with a 48 V AC coil and 1 NC auxiliary contact.

Sourcing Reality — Obsolete

This part is marked obsolete by the manufacturer. No official successor order code exists.

The 48 V AC coil means it pulls in on a 48 V control transformer, common in older machine-tool or HVAC panels. IP20 (VDE 0106) means finger-safe from the front but no protection against water ingress — panel-mount only, not washdown. The 57 mm depth and 90 mm width fit a standard DIN-rail footprint; the preassembled reversing busbar saves you one wiring step compared to building a mechanical interlock from two separate contactors.

Frequently asked questions

What are the key electrical ratings for LC2K16015E7?

It is a 3-pole reversing contactor rated AC-3 at 16 A for ≤ 440 V, with a 48 V AC coil and 1 NC auxiliary contact. The power circuit is rated for 690 V AC 50/60 Hz.

What is the physical size of this contactor?

It measures 57 mm deep, 90 mm wide, and 58 mm high, fitting a standard DIN-rail footprint.

What compliance documentation is available for this part?

The part carries IP20 protection per VDE 0106, flame retardance V1 per UL 94, and meets NF F 16-101/102 for rail applications. It is rated for operation up to 2000 m altitude without derating.

MPN
LC2K16015E7