Skip to main content
Log in
Schneider Electric LC2K1601E72 — Contactors

Schneider TeSys K LC2K1601E72 Reversing Contactor, 16A AC-3,

MPNLC2K1601E72
Active

Schneider Electric TeSys K reversing contactor, LC2K1601E72, 3P, AC-3 ≤440V 16A, 1 NC, 48V AC coil, IP20.

Schneider Electric LC2K1601E72 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LC2K1601E72 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control
LC2K1601E72 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-4 AC-3
LC2K1601E72 — Contacts & Poles
ParameterValue
Pole configuration3P
LC2K1601E72 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC2K1601E72 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

Rated AC-3 ≤440 V 16 A and AC-4, it handles standard induction motor reversing and plugging duty cycles without external interlocking wiring.

The AC-3 rating of 16 A at ≤440 V governs motor switching — this contactor starts and stops a 3-phase induction motor drawing up to 16 A full-load current. AC-4 rating covers inching and plugging, where the contactor opens under stalled-rotor current; expect reduced electrical life under that duty. The 3-pole (3 NO) main contacts and 1 NC auxiliary are built in — no add-on block needed for basic interlock feedback. IP20 finger-safe terminals suit enclosed panel mounting; keep the panel door closed during operation.

The preassembled reversing busbar saves panel space versus two separate contactors plus mechanical interlock. Operating altitude 2000 m without derating; ambient temperature range -25 to +50 °C. Flame retardance meets UL 94 V1 and NF F 16-101/102 for rail and industrial panel compliance.

Frequently asked questions

What is the closest alternative in the TeSys K family?

The closest variant differs by coil voltage — for example, the LC2K1601E7 (24 V AC coil) or LC2K1601BD (24 V DC coil). All share the same 16 A AC-3 rating, 3P frame, and reversing busbar. The choice is driven by control voltage availability in your panel.

What is the depth of this contactor?

Listed depth is 57 mm, with width 90 mm and height 58 mm. Fits standard DIN-rail enclosures.

What compliance documentation is available?

The contactor carries IP20 per VDE 0106, flame retardance V1 per UL 94, and meets NF F 16-101/102 for rail applications. Shock and vibration tested per IEC 60068-2-27 and IEC 60068-2-6. Operating altitude 2000 m without derating.

MPN
LC2K1601E72