Skip to main content
Log in
Schneider Electric LP2K12105MD — Contactors

Schneider Electric LP2K12105MD TeSys K Reversing Contactor,

MPNLP2K12105MD
Active

Schneider Electric TeSys K reversing contactor, 3P, AC-3 <= 440 V 12 A, 1 NO, 220 V DC coil, preassembled with reversing power busbar.

Schneider Electric LP2K12105MD datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LP2K12105MD — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control Resistive load
LP2K12105MD — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-1 AC-4 AC-3
LP2K12105MD — Contacts & Poles
ParameterValue
Pole configuration3P
LP2K12105MD — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LP2K12105MD — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The coil is 220 V DC, so verify your control voltage matches before wiring.

The utilisation categories cover AC-1 (resistive loads), AC-3 (squirrel-cage motor starting), and AC-4 (plugging/inching). The IP20 finger-safe terminals (per VDE 0106) are standard for enclosed panel mounting.

Mechanical and environmental robustness

This contactor is built for vibration and shock on industrial machinery. It withstands 15 Gn shocks on the Z axis when closed, and 4 Gn vibration from 5 to 300 Hz when closed. Flame retardance meets UL 94 V1 and NF F 16-101/102, so it is suitable for rail and transit applications where fire-smoke-toxicity requirements apply. Protective treatment conforms to IEC 60068 and DIN 50016 for damp-heat environments.

Frequently asked questions

What are the key ratings for this reversing contactor?

The LP2K12105MD is a 3-pole reversing contactor rated AC-3 at 12 A up to 440 V, with a 220 V DC coil. The power circuit is rated for 690 V AC 50/60 Hz. It covers utilisation categories AC-1, AC-3, and AC-4.

What compliance documentation does this part carry?

The contactor carries IP20 finger-safe protection per VDE 0106, flame retardance to UL 94 V1 and NF F 16-101/102, and protective treatment per IEC 60068 and DIN 50016. Operating altitude is 2000 m without derating.

What is the physical size of the LP2K12105MD?

Dimensions are 57 mm depth, 90 mm width, and 58 mm height. It is designed for DIN-rail mounting in a control panel.

MPN
LP2K12105MD