Skip to main content
Log in
Schneider Electric LP2K1210ND3 — Contactors

Schneider TeSys K LP2K1210ND3 Reversing Contactor, 12 A AC-3

MPNLP2K1210ND3
Active

Schneider Electric TeSys K reversing contactor, LP2K1210ND3, 3P, AC-3 12 A at 440 V, 60 V DC coil, 1 NO auxiliary contact, IP20.

Schneider Electric LP2K1210ND3 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LP2K1210ND3 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationResistive load Motor control
LP2K1210ND3 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-1 AC-4 AC-3
LP2K1210ND3 — Contacts & Poles
ParameterValue
Pole configuration3P
LP2K1210ND3 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LP2K1210ND3 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

Reversing Contactor for Motor Control

The 60 V DC coil with 1 NO auxiliary contact suits PLC or relay logic control circuits in control panels.

The AC-3 rating (12 A at 440 V) governs motor switching — this is the duty that matters for inrush during starting. AC-1 (resistive) and AC-4 (plugging/inching) are also covered, but the AC-3 figure is the one to match against your motor FLA. The 60 V DC coil draws from a control supply common in marine and industrial panels; verify your DC bus voltage and polarity. IP20 finger-safe terminals (VDE 0106) mean it is intended for enclosure mounting, not exposed installation.

Construction and Compliance

The contactor carries V1 flame retardance per UL 94 and meets NF F 16-101/102 for rail applications. Protective treatment TC per IEC 60068 and DIN 50016 indicates resistance to corrosive atmospheres. Mechanical robustness is specified for shock and vibration: 15 Gn closed, 10 Gn open on Z axis per IEC 60068-2-27, and vibration up to 4 Gn closed, 2 Gn open at 5–300 Hz per IEC 60068-2-6. This makes it suitable for installations subject to transport or machinery vibration, including marine and mobile equipment.

Panel Integration

The preassembled reversing busbar saves panel wiring time and reduces error. Mounts on DIN rail or via screws (standard TeSys K base). IP20 allows close spacing in a control cabinet; plan for adequate ventilation if multiple contactors are ganged, as the 50 °C max ambient is the enclosure interior temperature.

Frequently asked questions

What is the closest alternative to the LP2K1210ND3 in the TeSys K family?

Within the TeSys K range, the LP2K series shares the same physical footprint and busbar system. The key differentiator is the coil voltage: the LP2K1210ND3 uses a 60 V DC coil. For a 24 V DC coil, the equivalent is the LP2K1210BD3; for 110 V AC, the LP2K1210M7. All share the same 12 A AC-3 rating and 1 NO auxiliary contact.

What is the depth of the LP2K1210ND3?

The depth is 57 mm. Overall dimensions are 90 mm wide × 58 mm high × 57 mm deep.

What compliance documentation is available for the LP2K1210ND3?

The contactor carries V1 flame retardance per UL 94, meets NF F 16-101/102 for fire behaviour in rail vehicles, and has protective treatment TC per IEC 60068 and DIN 50016 for corrosive environments. IP20 per VDE 0106. Standard Schneider Electric declarations (RoHS, REACH) are available through the manufacturer's documentation portal.

MPN
LP2K1210ND3