Skip to main content
Log in
Schneider Electric MGN25125 — Miniature Circuit Breakers (MCB)

Schneider Electric MGN25125 C60H MCB, 3P, 2A, D Curve, 30 kA

MPNMGN25125
Obsolete

Schneider Electric Multi9 C60H, C60, miniature circuit-breaker, 3P, 2 A, D curve, 30 kA Icu at 240 V AC, EN/IEC 60947-2.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MGN25125 — Identification
ParameterValue
Product nameC60
Product rangeMulti9
Product range (series)C60
Product/component typeMiniature circuit-breaker
Device applicationDistribution
MGN25125 — Ratings
ParameterValue
Rated current (In)2 A at 50 °C conforming to EN/IEC 60947-2
Poles configuration3P
Number of protected poles3
Breaking capacity30 kA Icu at 240 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 15 kA Icu at 415 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 10 kA Icu at 440 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2
Rated service breaking capacity (Ics)15 kA 50 % conforming to EN/IEC 60947-2 - 240 V AC 50/60 Hz 7.5 kA 50 % conforming to EN/IEC 60947-2 - 415 V AC 50/60 Hz 5 kA 50 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz
Rated operational voltage (Ue)440 V AC 50/60 Hz 240 V AC 50/60 Hz phase to phase
Network type (AC/DC)AC
Network frequency50/60 Hz
Utilisation categoryCategory A conforming to EN/IEC 60947-2
MGN25125 — Protection
ParameterValue
Curve codeD
Trip unit technologyThermal-magnetic
Magnetic tripping limit12 x In +/- 20 %
Earth-leakage protectionSeparate block
Suitability for isolationYes conforming to EN/IEC 60947-2
Electrical durability (cycles)10000 cycles conforming to EN/IEC 60947-2
Mechanical durability (cycles)20000 cycles
MGN25125 — Mechanical
ParameterValue
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Control typeToggle
Terminal connection typeTunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end
Terminal tightening torquePower circuit: 2 N.m
Wire stripping lengthPower circuit: 14 mm
Contact position indicatorYes
Local signalling/indicationON/OFF indication
Width54 mm
Height81 mm
Depth73 mm
Number of 9 mm pitches6
MGN25125 — Environmental
ParameterValue
Operating ambient temperature-30...70 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to EN/IEC 60947-2
Pollution degree3 conforming to EN/IEC 60947-2
MGN25125 — Approvals
ParameterValue
StandardsEN/IEC 60947-2

Product details

The Schneider Electric MGN25125 is a C60H miniature circuit breaker from the Multi9 range, a 3-pole unit rated 2 A at 50 °C with a D tripping curve. The 30 kA Icu at 240 V AC phase-to-phase (and 15 kA at 415 V, 10 kA at 440 V) tells you it can safely interrupt fault currents up to those levels; below that it stays coordinated with downstream devices per EN/IEC 60947-2 Category A. IP20 finger-safe protection covers the terminal area once installed in an enclosure — standard for panelboard use.

Where it is used and deployment context

This is a distribution-grade miniature circuit breaker for AC networks at 50/60 Hz, rated up to 440 V phase-to-phase. The D curve and 2 A rating suit it for protecting motor circuits, small transformers, or lighting loads with high switch-on surges in a panelboard or sub-distribution board.

Frequently asked questions

What is the breaking capacity of MGN25125?

The MGN25125 has a breaking capacity of 30 kA Icu at 240 V AC, 15 kA at 415 V AC, and 10 kA at 440 V AC, all phase-to-phase, conforming to EN/IEC 60947-2.

What does the D curve mean for MGN25125?

The D curve means the magnetic trip operates at 12 times the rated current (±20 %), so the breaker holds through high inrush currents typical of motor and transformer loads without nuisance tripping.

Where can I buy MGN25125?

The MGN25125 is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm commitment.

What compliance documentation is available for MGN25125?

The MGN25125 is certified to EN/IEC 60947-2 (Category A, pollution degree 3) and carries IP20 protection. It is suitable for isolation. For specific RoHS, REACH, or UL documentation, request the manufacturer's declaration at quote time.

MPN
MGN25125