Skip to main content
Log in
SICK DT50-P2113 — Proximity Sensors

SICK DT50-P2113 Dx50 Distance Sensor, 20 m Red Laser, PNP

MPNDT50-P2113

SICK Dx50 series, DT50-P2113 optical distance sensor, 20 m sensing range, red laser, PNP output, 15 ms response, IP65, M12 5-pin connector.

SICK DT50-P2113 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DT50-P2113 — Identification
ParameterValue
SeriesDx50
DT50-P2113 — Sensing
ParameterValue
Sensing distance, max.20 m
DT50-P2113 — Electrical
ParameterValue
Operating voltage, max.30 VDC
Operating voltage, min.10 VDC
Termination typeConnector, M12, 5-Pin, Male
DT50-P2113 — Mechanical
ParameterValue
Length58 mm
DT50-P2113 — Environmental
ParameterValue
Operating temperature, max.140 °C
Operating temperature, min.-30 °C
IP protection ratingIP65
DT50-P2113 — Other specifications
ParameterValue
Width36 mm
Height63 mm
Light typeRed Laser
Sensor typeDistance Sensor
Response time15 ms
Sensing distance min.200 mm
Optical sensor output typePNP

Product details

What the 20 m laser range means for your application

The SICK DT50-P2113 is a Dx50 series optical distance sensor that delivers a 20 m sensing range using a red laser light source. That 20 m reach means it can resolve position on a moving target — a crane trolley, an AGV, a gantry axis — without needing a separate reflector or target plate. The laser spot stays collimated over the full range, so the measurement is repeatable within the sensor's resolution at both 200 mm minimum and 20 m maximum. Response time is 15 ms.

PNP output and connector — wiring considerations

The DT50-P2113 terminates in an M12, 5-pin male connector and provides a PNP switching output. Operating voltage range is 10 to 30 VDC.

Frequently asked questions

What is the closest functional second-source to the DT50-P2113?

The closest functional sibling is the DT50-P1123, which shares the same form factor, connector, output type, and IP rating but is limited to a 10 m sensing range and has a 20 ms response time.

Will the DT50-P2113 drop into a panel designed for the DT50-P1123 without rewiring?

Yes. Both sensors share the same 36 mm x 63 mm x 58 mm housing, the same M12 5-pin male connector, and the same PNP output type. The mounting holes and connector location are identical, so it is a direct mechanical and electrical replacement.

What compliance documentation is available for the DT50-P2113?

The manufacturer provides standard compliance documentation including a datasheet with specifications. For specific certifications (RoHS, REACH, UL, IEC), request the current declaration of conformity from your distributor with the RFQ.

MPN
DT50-P2113