Skip to main content
Log in
SICK OD1-B015H05I14 — Proximity Sensors

OD1-B015H05I14 2D Laser Displacement Sensor, OD Mini, 4-20mA

MPNOD1-B015H05I14
Active

OD1-B015H05I14, 2D Laser Displacement Sensor, OD Mini, 12~24VDC, 4-20mA analog output, IP67, 10.0~20.0mm installation distance, chassis mount, M8 connector.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

OD1-B015H05I14 — Identification
ParameterValue
SeriesOD Mini
Type2D Laser Displacement Sensor
OD1-B015H05I14 — Mechanical
ParameterValue
Mounting typeChassis Mount
OD1-B015H05I14 — Environmental
ParameterValue
Operating temperature range-10°C~40°C
OD1-B015H05I14 — Other specifications
ParameterValue
Supply voltage12 ~ 24VDC
Termination styleConnector
IP ratingIP67 - Dust Tight, Waterproof
Installation distance10.0mm ~ 20.0mm

Product details

The OD1-B015H05I14 is a 2D laser displacement sensor from the OD Mini series, delivering a 4-20 mA analog output proportional to the measured displacement. It operates on a 12~24 VDC supply and is rated IP67 — dust-tight and waterproof, so it holds up in washdown environments or exposed positions on a conveyor line. The sensor is chassis-mounted and connects via a 4-pin M8 connector; no cable gland or terminal block wiring needed at the sensor end.

Installation distance is specified as 10.0 mm to 20.0 mm — that is the standoff range where the sensor produces a valid 4-20 mA signal. Outside that window the output saturates or drops out; the mounting bracket must hold the sensor face within that band relative to the target. The 4-20 mA loop is standard for most PLC analog input cards, so no signal conditioner is needed between the sensor and the controller.

Frequently asked questions

Where can I buy OD1-B015H05I14 and how do I get a price?

The OD1-B015H05I14 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the difference between OD1-B015H05I14 and OD1-B015H05U14?

The OD1-B015H05I14 and OD1-B015H05U14 share the same mechanical footprint, supply voltage, IP67 rating, and 10.0~20.0 mm installation distance. The I14 variant outputs a 4-20 mA analog signal; the U14 variant outputs 0-10 VDC. If your analog input card expects voltage rather than current, the U14 is the direct drop-in. Both use the same M8 4-pin connector and chassis mount, so swapping between them requires no rewiring of the connector or bracket.

What compliance documentation does this brand provide for OD1-B015H05I14?

The evidence does not list specific compliance documentation (RoHS, REACH, UL, IEC) for this part. Typically, the manufacturer provides a declaration of conformity on request.

Will OD1-B015H05I14 drop into a panel that was specified around OD1-B015H05U14 without rewiring?

Yes — both use the same chassis mount, M8 4-pin connector, and 12~24 VDC supply, so the mechanical and electrical fit is identical. The only difference is the output signal: 4-20 mA on the I14 versus 0-10 VDC on the U14. If your PLC input card accepts current loops, no rewiring is needed.

MPN
OD1-B015H05I14