The OD1-B035H15U14 is a 2D laser displacement sensor from the SICK OD Mini series, delivering a 0-10V analog output proportional to the measured displacement. It operates on a 12~24VDC supply and is housed in a chassis-mount package with a 4-pin M8 connector for quick field replacement. The 20.0mm to 50.0mm installation distance defines the working range — the sensor must be mounted so the target falls within that band for a valid reading. The IP67 rating means the housing and optics withstand dust ingress and temporary immersion, so it can be deployed in washdown zones or damp environments without an additional enclosure. The 0-10V analog output interfaces directly with standard PLC analog input cards — no protocol conversion needed.
Chassis-mount format with a 4-pin M8 connector — the sensor body bolts to a bracket or machine frame, and the M8 cable carries both power and the analog signal. No DIN-rail adapter is needed, but the cable route must be planned to keep the connector accessible for service. The IP67 rating allows direct mounting on a conveyor frame or machine guard where washdown or coolant spray is present. The 0-10V output runs to a PLC analog input; keep the cable run under 10 m to avoid signal drop, and route it separately from power cables to maintain noise immunity on the analog line.