The OD1-B035H15U25 is a 2D laser displacement sensor from the OD Mini series, delivering a 0-10V analog output proportional to the measured displacement over a 20.0mm to 50.0mm installation distance. Runs on a 12~24VDC supply and terminates via a cable with M12 connector — standard for quick swap in a chassis-mount fixture. IP67 rating means the housing and optics survive washdown environments, so this sensor can sit on a conveyor frame or robot end-effector where coolant spray or dust is present. Operating temperature range of -10°C to 40°C covers most indoor factory floor conditions but not freezer or high-temp oven zones.
The OD1-B035H15I25 shares the same OD Mini chassis, 12~24VDC supply, 20-50mm range, IP67 seal, and cable-with-connector termination — the difference is the output: the U25 puts out 0-10V analog, the I25 outputs 4-20 mA current loop. If your PLC analog input card is voltage-type, the U25 is the correct drop-in; if it's current-loop, the I25 is the one. No rewiring needed beyond swapping the sensor — same footprint, same connector.
Deployment context
Chassis mount — bolts to a bracket or machine frame, not a DIN rail. The M12 connector makes cable replacement fast without opening the sensor housing. IP67 lets it run in washdown zones on food lines or in dusty packaging cells without an extra enclosure.