The OD2-N250W150I0: The 250mm ±150mm measurement window means the sensor captures a 300mm total span at the nominal standoff — enough for profile inspection of parts up to that width on a conveyor or assembly fixture. The 100-400mm installation distance gives you some mounting flexibility, but the sensor's resolution and linearity are optimized within the 250mm nominal range; pushing to the far end of the window trades off accuracy. The -10°C to 40°C operating range is typical for indoor industrial environments; outdoor or freezer applications would require thermal management. Chassis mount with a connector termination means a clean panel install: the sensor bolts to a bracket or machine frame, and a pre-wired M12-style connector (not included) carries the 12-24VDC power and NPN output back to the controller. No hardwiring through a cable gland — swap time is minutes, not hours.
OD2-N250W150I0 2D Laser Displacement Sensor, 12-24VDC, NPN,
MPNOD2-N250W150I0
Active
OD Value series 2D Laser Displacement Sensor, OD2-N250W150I0, 12 ~ 24VDC, NPN output, 250mm ±150mm measurement range, IP67, chassis mount, connector termination.
$914.40 – $1,450.09Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026
Specifications
| Parameter | Value |
|---|---|
| Series | OD Value |
| Type | 2D Laser Displacement Sensor |
| Parameter | Value |
|---|---|
| Mounting type | Chassis Mount |
| Parameter | Value |
|---|---|
| Operating temperature range | -10°C~40°C |
| Parameter | Value |
|---|---|
| Supply voltage | 12 ~ 24VDC |
| Termination style | Connector |
| IP rating | IP67 - Dust Tight, Waterproof |
| Installation distance | 100.0mm ~ 400.0mm |
Product details
Frequently asked questions
What is the closest functional second-source for OD2-N250W150I0?
The OD2-N250W150U0 is mechanically and electrically identical except for a PNP output instead of NPN. If your system uses PNP logic, the U0 is a direct replacement without any wiring changes.
What is the measurement range of OD2-N250W150I0?
It has a 250mm nominal measurement range with ±150mm window, installable at 100mm to 400mm distance from the target.
Will OD2-N250W150I0 drop into a panel specified for OD2-N250W150U0?
Yes — same chassis mount, same connector, same supply voltage, same IP67 rating. The only difference is the output: NPN on the I0 versus PNP on the U0. Verify your PLC input card polarity before swapping.
MPN
OD2-N250W150I0