The OD2-N50W10A2 is a 2D laser displacement sensor from the OD Value series, delivering a 50mm measurement range with ±10mm linearity. The 12~24VDC supply range covers standard industrial control voltages, and the IP67 rating means the sensor body and optics hold up under washdown — suitable for food-and-bev lines or wet machining areas where dust and water are present. Installation distance is 40.0mm to 60.0mm, so the sensor needs to sit within a 20mm window from the target — not a long-range unit, but precise enough for height profiling, gap inspection, or part presence on a conveyor. Operating temperature is -10°C to 40°C, which covers most indoor factory floors but not freezers or ovens without a thermal barrier.
Mounts via chassis mount — no DIN-rail clip, so plan for a bracket or panel cutout. Termination is cable leads, which means you'll need a junction box or a sealed connector if the sensor is in a washdown zone. The cable leads simplify field wiring but add a splice point to protect from moisture.