The OD2-P250W150I2 is a 2D laser displacement sensor from the SICK OD Value series, designed for non-contact profile measurement and position detection on moving or stationary targets. It operates on a 12~24VDC supply and delivers a 2D profile across a 100.0mm to 400.0mm installation distance, making it suitable for gap, edge, or height monitoring on conveyor lines or assembly stations. The IP67 rating means the sensor body is dust-tight and protected against temporary immersion — it handles washdown environments in food-and-bev or automotive powertrain lines without a secondary enclosure. Termination is via cable leads (2M cable specified for MOTOMAN integration), so the sensor arrives ready to wire into a robot controller or remote I/O cabinet without a separate connector purchase.
Chassis-mount design — bolt directly to a bracket or machine frame using the sensor's mounting holes. No DIN rail adapter needed, but the cable exit must be routed through a gland or strain relief if used in a washdown zone. Operating temperature range of -10°C to 40°C limits deployment to indoor or conditioned environments — not rated for freezing storage or high-heat foundry lines.