Skip to main content
Log in
SICK OD2-P50W10I0 — Proximity Sensors

OD2-P50W10I0 2D Laser Displacement Sensor, 50mm ±10mm PNP, I

MPNOD2-P50W10I0
Active

OD2-P50W10I0, OD Value Series, 2D Laser Displacement Sensor, 12~24VDC, PNP, 50mm ±10mm range, IP67, Chassis Mount, Connector.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

OD2-P50W10I0 — Identification
ParameterValue
SeriesOD Value
Type2D Laser Displacement Sensor
OD2-P50W10I0 — Mechanical
ParameterValue
Mounting typeChassis Mount
OD2-P50W10I0 — Environmental
ParameterValue
Operating temperature range-10°C~40°C
OD2-P50W10I0 — Other specifications
ParameterValue
Supply voltage12 ~ 24VDC
Termination styleConnector
IP ratingIP67 - Dust Tight, Waterproof
Installation distance40.0mm ~ 60.0mm

Product details

What this sensor does on the line

The OD2-P50W10I0 is a 2D laser displacement sensor from the OD Value series, delivering a 50mm measurement range with ±10mm of linear travel. The PNP output signals displacement directly to a PLC or controller, so it fits into a standard 24VDC control circuit without a signal conditioner. IP67 sealing means the optics and housing survive washdown — suitable for food, beverage, or packaging lines where hose-down cleaning is routine.

Installation distance and mounting

Mount the sensor with a standoff between 40.0mm and 60.0mm from the target surface. That gap defines the working window — too close or too far and the laser spot won't focus correctly. Chassis-mount footprint with a connector termination; no hardwiring needed at the sensor end, just a mating cable.

Frequently asked questions

Where can I buy OD2-P50W10I0 and how do I get a price?

The OD2-P50W10I0 is sourced and quoted to order against an RFQ through independent distribution. Submit a request for current pricing and availability.

Will OD2-P50W10I0 drop into a panel that was specified around OD2-P50W10A0 without rewiring?

Yes — the OD2-P50W10I0 shares the same mechanical footprint, supply voltage (12~24VDC), connector termination, IP67 rating, and 40.0mm~60.0mm installation distance as the OD2-P50W10A0. The only difference is the output type: the I0 variant is PNP, while the A0 is analog. If the panel expects a PNP discrete signal, it's a direct swap; if it expects analog, you'll need to adapt the output wiring or change the PLC input card.

MPN
OD2-P50W10I0