The OD2-P50W10U2 is a 2D Laser Displacement Sensor from the OD Value series, delivering a PNP output with a 50mm ±10mm measurement window. It operates on a 12 ~ 24VDC supply and is chassis-mounted with cable leads — typical for inline profiling on a conveyor or web line where you need a non-contact height or edge measurement at a fixed standoff.
Installation distance is 40.0mm ~ 60.0mm — that 20mm band is the working range where the sensor gives valid displacement data. The 50mm ±10mm spec means the center of that band is 50mm from the sensor face, with ±10mm of measurement travel. If your target moves outside that 40–60mm window, the sensor won't produce a usable reading. IP67 rating means the housing is dust-tight and can survive temporary immersion — fine for washdown areas or dusty factory floors, but not for continuous submersion or high-pressure spray. Operating temperature is -10°C~40°C, so keep it out of freezing storage and away from ovens.
Deployment context
Chassis-mount form factor with cable leads means it bolts to a bracket or machine frame — no DIN rail, no connector. The IP67 rating lets it sit on a wet or dusty line without an enclosure, but the cable leads need a strain relief or gland at the panel entry.