The SICK UM30-214113 is an ultrasonic proximity sensor from the UM30 series, designed for non-contact distance measurement in industrial automation. Sensing range runs from 350 mm minimum to 3.4 m maximum, which covers medium-range presence detection and level monitoring in tanks, hoppers, or conveyor zones. The 9–30 V DC supply range means it works on standard 24 V control power without a separate regulator. Housing is brass with nickel plating and a PBT sensing face — the brass barrel stands up to washdown and mild chemical exposure, while the PBT face gives the ultrasonic transducer a clean acoustic window. Rated IP65 and IP67, so it handles hose-down cleaning and temporary submersion in food or beverage lines.
Termination is an M12 5-pin male connector — standard for industrial sensors. No pigtail to strip; just plug into a pre-wired M12 cordset. The brass barrel threads into a standard 30 mm mounting bracket or through-hole, and the nickel plating resists corrosion in damp panels. No special cooling or heating required within that band.
Same part, different passport — if you see this from a non-local distributor, the genuine article is the same sensor regardless of origin. Compliance documentation (RoHS, REACH) is standard with the brand; no UL or IEC mark is listed in the spec record, so verify with your QC if your panel requires a specific agency approval.